---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Fri 06/16/17: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:08 AM - Re: Radiator leak (Ivor) 2. 07:39 AM - Re: Radiator leak (Ivor) 3. 02:18 PM - Stall Warner - switch problems (clivesutton) ________________________________ Message 1 _____________________________________ Time: 04:08:41 AM PST US Subject: Europa-List: Re: Radiator leak From: "Ivor" Ritchard It's a good reason to replace the jubilee clips for the constant pressure spring clamps, they expand and contract with heat without cutting into the hose, and it goes without saying the silicone hoses are preferable to the rubber ones so definitely worth replacing if you haven't already done so, Ivor Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470172#470172 ________________________________ Message 2 _____________________________________ Time: 07:39:01 AM PST US Subject: Europa-List: Re: Radiator leak From: "Ivor" Ritchard It's a good reason to replace the jubilee clips for the constant pressure spring clamps, they expand and contract with heat without cutting into the hose, and it goes without saying the silicone hoses are preferable to the rubber ones so definitely worth replacing if you haven't already done so, Ivor Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470175#470175 ________________________________ Message 3 _____________________________________ Time: 02:18:03 PM PST US Subject: Europa-List: Stall Warner - switch problems From: "clivesutton" I have the 0.072 PSI/5mBar/500Pascal Vacuum stall warner switch supplied by Europa fitted in G-YETI (RS Components part No 317-443) but I'm struggling to get it to work correctly - despite changing the switch for a new one today. The first switch would not reliably make contact at the stall warn speed (light/intermittent squeaks at varying speeds) and whilst the other does work more reliably it is closed/the horn sounds once the a/c is back on the ground/at zero to low forward speed. Has anyone else had this problem and can share how they fixed it or can anyone recommend another more reliable switch (based on personal experience in use) please? The pipe between switch and the hole just below the wing leading edge is correctly connected to the NO port A btw. All inputs appreciated Clive S Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470177#470177 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.