Today's Message Index:
----------------------
0. 07:50 AM - What's Your Contribution Used For? (Matt Dralle)
1. 07:03 AM - Testing (Karl Heindl)
2. 01:22 PM - San Diego Europas? (Pete)
3. 01:53 PM - Re: San Diego Europas? (bill mcclellan)
4. 02:30 PM - trip report with pics Abergavenny (graeme bird)
5. 04:31 PM - Resins, faring compounds, etc, Need help (Vlodek9)
6. 07:03 PM - =?utf-8?Q?Re:__Resins,_faring_compounds,_etc,_Need_help? ()
7. 11:27 PM - Re: Resins, faring compounds, etc, Need help (graeme bird)
Message 0
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | What's Your Contribution Used For? |
Dear Listers,
You might have wondered at some point, "What's my Contribution used for?" Here
are just a few examples of what your direct List support enables... It provides
for the expensive, commercial-grade Internet connection used on the List.
It pays for the regular system hardware and software upgrades enabling the highest
performance possible for List services such as the Archive Search Engine,
List Browser, and the Web Forums. It pays for the over 23 years of on-line
archive data always available for instant search and access. And, it offsets
the many hours spent writing, developing, and maintaining the custom applications
that power these List Service such as the List Browse, Search Engine, Forums,
and Wiki.
But most importantly, your List Contribution enables a forum where you and your
peers can communicate freely in an environment that is free from moderation,
censorship, advertising, commercialism, SPAM, and computer viruses.
It is YOUR CONTRIBUTION that directly enables all these aspects of Matronics List
services. Please support it today with your List Contribution. Its one of
the best investments you can make in your Sport!
List Contribution Web Site:
http://www.matronics.com/contribution
or, you can send a personal check to the following address:
Matronics / Matt Dralle
581 Jeannie Way
Livermore, CA 94550
Thank you for your support!
Matt Dralle
Email List Administrator
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Testing
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | San Diego Europas? |
I'll be in SD in February on biz and have the last Saturday off for myself, a
nd was wondering if anyone had the contact info for Robert Lyndsay and his N
77EU? l'd love to swing by and take a look at his ship for inspiration if t
he bird is still out there :-)
Cheers and thx,
Pete
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: San Diego Europas? |
Pete, this might be kinda old info but his email might still be: rlindsa2@san.rr.com.
Bill
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=475182#475182
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | trip report with pics Abergavenny |
not an epic adventure I know, but maybe someone will go for the first time and
enjoy it on the basis of these few words and pictures.
https://forums.flyer.co.uk/viewtopic.php?f=1&t=106041
--------
Graeme Bird
G-UMPY - Mono Classic/XS FFW 912S, Woodcomp 3000/3W CS, trutrak Gemini 2 axis
AP, PAW, PFLARM core, ads-b out, 8.33khz, mode S, FP-5, Aera500, SD on Nexus,
SmartA3
290 hours & 5 years on the Mono, 930 total
g(at)gdbmk.co.uk
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=475184#475184
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Resins, faring compounds, etc, Need help |
Hello all
Im looking for suggestions as to what materials I should use regarding delimitation
and cracking on the Europa main wing and fuselage.
With so many advancements in available materials, I feel overwhelmed in making
my purchase decisions. Further more, I have no practical experience, only theoretical
based on what I have read and watched on the internet.
Issues:
Fiberglass delaminate spots on main wing (core not effected).
Filler/bondo (dry micro??) delaminate spots on main wing.
Hairline cracks (spiderweb) on fuselage and cowl
So with this in mind, the following list is what I think I need to purchase but
need suggestions on.
1. Which resin should I use:
a. Epoxy, polyester, laminating, gel coat, etc
2. Faring compound for pits and surface shaping
a. Bondo, filler, dry micro, etc
*Please recommend brand names and type of product so I can track it down and purchase.
Finally, I know that the Europa uses unidirectional and bidirectional cloth, but
for some reason I cant seem to locate what thickness I should get.
Again, I am a novice at this so any advice as to what materials I should buy and
where, would be very appreciated.
Thank you
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=475186#475186
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: utf-8?Q?Re:_Europa-List:_Resins,_faring_compounds,_etc,_Need_help? |
TG9vayBhdCB0aGlzOg0KDQpodHRwOi8vd3d3LmFpcmNyYWZ0c3BydWNlLmNvbS9jYXRhbG9nL2Nt
cGFnZXMvcnV0YW4ucGhwP2NsaWNra2V5PTU4NTINCg0KaHR0cDovL3d3dy5haXJjcmFmdHNwcnVj
ZS5jb20vY2F0YWxvZy9jbXBhZ2VzL2Flcm9wb3h5LnBocD9jbGlja2tleT01ODUyDQoNCg0KDQoN
Cg0KDQoNCg0KU2VudCBmcm9tIFdpbmRvd3MgTWFpbA0KDQoNCg0KDQoNCkZyb206IFZsb2RlazkN
ClNlbnQ6IOKAjkZyaWRheeKAjiwg4oCOTm92ZW1iZXLigI4g4oCOMTfigI4sIOKAjjIwMTcg4oCO
NOKAjjrigI4zMOKAjiDigI5QTQ0KVG86IGV1cm9wYS1saXN0QG1hdHJvbmljcy5jb20NCg0KDQoN
Cg0KDQotLT4gRXVyb3BhLUxpc3QgbWVzc2FnZSBwb3N0ZWQgYnk6ICJWbG9kZWs5IiA8cnY5YTIw
MDBAZ21haWwuY29tPg0KDQpIZWxsbyBhbGwNCg0KScOi4oKs4oSibSBsb29raW5nIGZvciBzdWdn
ZXN0aW9ucyBhcyB0byB3aGF0IG1hdGVyaWFscyBJIHNob3VsZCB1c2UgcmVnYXJkaW5nIGRlbGlt
aXRhdGlvbiBhbmQgY3JhY2tpbmcgb24gdGhlIEV1cm9wYSBtYWluIHdpbmcgYW5kIGZ1c2VsYWdl
Lg0KDQpXaXRoIHNvIG1hbnkgYWR2YW5jZW1lbnRzIGluIGF2YWlsYWJsZSBtYXRlcmlhbHMsIEkg
ZmVlbCBvdmVyd2hlbG1lZCBpbiBtYWtpbmcgbXkgcHVyY2hhc2UgZGVjaXNpb25zLiBGdXJ0aGVy
IG1vcmUsIEkgaGF2ZSBubyBwcmFjdGljYWwgZXhwZXJpZW5jZSwgb25seSB0aGVvcmV0aWNhbCBi
YXNlZCBvbiB3aGF0IEkgaGF2ZSByZWFkIGFuZCB3YXRjaGVkIG9uIHRoZSBpbnRlcm5ldC4NCg0K
SXNzdWVzOg0KRmliZXJnbGFzcyBkZWxhbWluYXRlIHNwb3RzIG9uIG1haW4gd2luZyAoY29yZSBu
b3QgZWZmZWN0ZWQpLg0KRmlsbGVyL2JvbmRvIChkcnkgbWljcm8/PykgZGVsYW1pbmF0ZSBzcG90
cyBvbiBtYWluIHdpbmcuDQpIYWlybGluZSBjcmFja3MgKHNwaWRlcndlYikgb24gZnVzZWxhZ2Ug
YW5kIGNvd2wNCg0KU28gd2l0aCB0aGlzIGluIG1pbmQsIHRoZSBmb2xsb3dpbmcgbGlzdCBpcyB3
aGF0IEkgdGhpbmsgSSBuZWVkIHRvIHB1cmNoYXNlIGJ1dCBuZWVkIHN1Z2dlc3Rpb25zIG9uLg0K
w6LigqzCqDEuIFdoaWNoIHJlc2luIHNob3VsZCBJIHVzZToNCiBhLiBFcG94eSwgcG9seWVzdGVy
LCBsYW1pbmF0aW5nLCBnZWwgY29hdCwgZXRjIA0KIA0KMi4gRmFyaW5nIGNvbXBvdW5kIGZvciBw
aXRzIGFuZCBzdXJmYWNlIHNoYXBpbmcNCiBhLiBCb25kbywgZmlsbGVyLCBkcnkgbWljcm8sIGV0
Yw0KDQoqUGxlYXNlIHJlY29tbWVuZCBicmFuZCBuYW1lcyBhbmQgdHlwZSBvZiBwcm9kdWN0IHNv
IEkgY2FuIHRyYWNrIGl0IGRvd24gYW5kIHB1cmNoYXNlLiAgDQoNCkZpbmFsbHksIEkga25vdyB0
aGF0IHRoZSBFdXJvcGEgdXNlcyB1bmlkaXJlY3Rpb25hbCBhbmQgYmlkaXJlY3Rpb25hbCBjbG90
aCwgYnV0IGZvciBzb21lIHJlYXNvbiBJIGNhbsOi4oKs4oSidCBzZWVtIHRvIGxvY2F0ZSB3aGF0
IHRoaWNrbmVzcyBJIHNob3VsZCBnZXQuDQoNCkFnYWluLCBJIGFtIGEgbm92aWNlIGF0IHRoaXMg
c28gYW55IGFkdmljZSBhcyB0byB3aGF0IG1hdGVyaWFscyBJIHNob3VsZCBidXkgYW5kIHdoZXJl
LCB3b3VsZCBiZSB2ZXJ5IGFwcHJlY2lhdGVkLg0KDQpUaGFuayB5b3UNCg0KDQoNCg0KUmVhZCB0
aGlzIHRvcGljIG9ubGluZSBoZXJlOg0KDQpodHRwOi8vZm9ydW1zLm1hdHJvbmljcy5jb20vdmll
d3RvcGljLnBocD9wPTQ3NTE4NiM0NzUxODYNCg0KDQoNCg0KDQoNCl8tPT09PT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09DQpfLT0gICAgICAg
ICAgLSBUaGUgRXVyb3BhLUxpc3QgRW1haWwgRm9ydW0gLQ0KXy09IFVzZSB0aGUgTWF0cm9uaWNz
IExpc3QgRmVhdHVyZXMgTmF2aWdhdG9yIHRvIGJyb3dzZQ0KXy09IHRoZSBtYW55IExpc3QgdXRp
bGl0aWVzIHN1Y2ggYXMgTGlzdCBVbi9TdWJzY3JpcHRpb24sDQpfLT0gQXJjaGl2ZSBTZWFyY2gg
JiBEb3dubG9hZCwgNy1EYXkgQnJvd3NlLCBDaGF0LCBGQVEsDQpfLT0gUGhvdG9zaGFyZSwgYW5k
IG11Y2ggbXVjaCBtb3JlOg0KXy09DQpfLT0gICAtLT4gaHR0cDovL3d3dy5tYXRyb25pY3MuY29t
L05hdmlnYXRvcj9FdXJvcGEtTGlzdA0KXy09DQpfLT09PT09PT09PT09PT09PT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PQ0KXy09ICAgICAgICAgICAgICAgLSBN
QVRST05JQ1MgV0VCIEZPUlVNUyAtDQpfLT0gU2FtZSBncmVhdCBjb250ZW50IGFsc28gYXZhaWxh
YmxlIHZpYSB0aGUgV2ViIEZvcnVtcyENCl8tPQ0KXy09ICAgLS0+IGh0dHA6Ly9mb3J1bXMubWF0
cm9uaWNzLmNvbQ0KXy09DQpfLT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PQ0KXy09ICAgICAgICAgICAgICAtIE5FVyBNQVRST05JQ1Mg
TElTVCBXSUtJIC0NCl8tPSBBZGQgc29tZSBpbmZvIHRvIHRoZSBNYXRyb25pY3MgRW1haWwgTGlz
dCBXaWtpIQ0KXy09ICAgLS0+IGh0dHA6Ly93aWtpLm1hdHJvbmljcy5jb20NCl8tPT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09DQpfLT0g
ICAgICAgICAgICAgLSBMaXN0IENvbnRyaWJ1dGlvbiBXZWIgU2l0ZSAtDQpfLT0gIFRoYW5rIHlv
dSBmb3IgeW91ciBnZW5lcm91cyBzdXBwb3J0IQ0KXy09ICAgICAgICAgICAgICAgICAgICAgICAg
ICAgICAgLU1hdHQgRHJhbGxlLCBMaXN0IEFkbWluLg0KXy09ICAgLS0+IGh0dHA6Ly93d3cubWF0
cm9uaWNzLmNvbS9jb250cmlidXRpb24NCl8tPT09PT09PT09PT09PT09PT09PT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Resins, faring compounds, etc, Need help |
You don't say whether you are building or its been completed a while, are you sure
it's not a paint or filler issue ? The fuselage is fibre either side of foam
so I'm not sure how you would see delamination there.
--------
Graeme Bird
G-UMPY - Mono Classic/XS FFW 912S, Woodcomp 3000/3W CS, trutrak Gemini 2 axis
AP, PAW, PFLARM core, ads-b out, 8.33khz, mode S, FP-5, Aera500, SD on Nexus,
SmartA3
325 hours & 6 years on the Mono, 930 total
g(at)gdbmk.co.uk
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=475190#475190
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|