Today's Message Index:
----------------------
1. 01:48 AM - AW: Re: Tool kit and spares kit (A. Buess Aviatik)
2. 05:34 AM - AW: Re: Tool kit and spares kit (h&jeuropa)
3. 06:46 AM - Re: AW: Re: Tool kit and spares kit (Jerry Rehn)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Tool kit and spares kit |
Jerry,
What type is the "much better tube nearly twice as thick" and where did you buy
it?
Regards, Alfred
-----Ursprngliche Nachricht-----
Von: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] Im Auftrag von Jerry Rehn
Gesendet: Freitag, 1. Dezember 2017 23:42
An: europa-list@matronics.com
Betreff: Re: Europa-List: Re: Tool kit and spares kit
A good list! I carry pretty much the same, I also carry a copy of the page from
the manual illustration of the wheel, handy to help see assembling. I have had
two tube failures, fortunately not while landing, but the next morning flat.
Both failures were at the stamp mark on the tube, weakened by that stamp. Finally
found a much better tube nearly twice as thick. No more issues, but paranoid
enough to carry a spare tube. I still run at 18lbs, I could see the tube wouldnt
suffer as much with more pressure but Im not sure I wouldnt be bouncing
a lot at 26!
Jerry
Sent from my iPhone
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: AW: Re: Tool kit and spares kit |
Alfred,
I have purchased heavy tubes from Desser Tire. The item number is TU 700/800-6
AM, Butyl Easy Valve TR-87.
Here is the link: https://www.desser.com/Aircraft-Tires-and-Tubes/700-800-6-AERO-CLASSIC-INLEAKGUARD-IN-BUTYL-TUBE-AERO-CLASS-GL-7087.asp
Valve TR-87 is the angled valve. They cost $59.95.
I also purchase Airhawk 700-6 6 ply tires from Desser.
Jim Butcher
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=476059#476059
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Tool kit and spares kit |
Alfred
Jim sent off email before me, thats where I get mine too.
Jerry
Sent from my iPad
> On Dec 2, 2017, at 2:47 AM, A. Buess Aviatik <ykibuess@bluewin.ch> wrote:
>
>
> Jerry,
> What type is the "much better tube nearly twice as thick" and where did you buy
it?
> Regards, Alfred
>
> -----Ursprngliche Nachricht-----
> Von: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] Im Auftrag von Jerry Rehn
> Gesendet: Freitag, 1. Dezember 2017 23:42
> An: europa-list@matronics.com
> Betreff: Re: Europa-List: Re: Tool kit and spares kit
>
>
> A good list! I carry pretty much the same, I also carry a copy of the page from
the manual illustration of the wheel, handy to help see assembling. I have
had two tube failures, fortunately not while landing, but the next morning flat.
Both failures were at the stamp mark on the tube, weakened by that stamp. Finally
found a much better tube nearly twice as thick. No more issues, but paranoid
enough to carry a spare tube. I still run at 18lbs, I could see the tube
wouldnt suffer as much with more pressure but Im not sure I wouldnt be bouncing
a lot at 26!
> Jerry
> Sent from my iPhone
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|