Today's Message Index:
----------------------
 
     1. 01:47 AM - Re: Rotax Oil Tank Drain Plug (JohnFrance)
     2. 02:08 AM - Re: Re: Rotax Oil Tank Drain Plug (Peter Jeffers)
 
 
 
Message 1
| 					INDEX |  Back to Main INDEX |  
| 					NEXT |  Skip to NEXT Message |  
| 	LIST |  Reply to LIST Regarding this Message |  
| 		SENDER |  Reply to SENDER Regarding this Message |  
  | 
      
      
| Subject:  | Re: Rotax Oil Tank Drain Plug | 
      
      
      Hello Jim and others who might be interested.
      Just to confirm, the drain works well. I drilled a 1.5 mm hole in the casing where
      the circlip washer goes to allow wire locking in position.
      Cheers
      John
      
      [quote="Jim Kelly"]Hi John,
       Please keep me posted
      Jim Kelly.
      
      
      G-BWEG Classic Taildragger
      
      
       Hello to all, this post made me think I need to fit one of these as well.
       A quick search on the Internet yielded this result from Quick Valve in the UK.
       Model F107N has a nipple to allow a tube to be fitted and it costs 23.97 GBP plus
      postage. Mine is on it's way.
      
       http://www.quickvalve.co.uk/f107n_details.htm (http://www.quickvalve.co.uk/f107n_details.htm)
      
       Regards,
       John
      
       --------
       Europa mono Nr 192
      
      --------
      Europa mono Nr 192
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=476084#476084
      
      
Message 2
| 					INDEX |  Back to Main INDEX |  
| 				PREVIOUS |  Skip to PREVIOUS Message |  
| 					NEXT |  Skip to NEXT Message |  
| 	LIST |  Reply to LIST Regarding this Message |  
| 		SENDER |  Reply to SENDER Regarding this Message |  
  | 
      
      
| Subject:  | Re: Rotax Oil Tank Drain Plug | 
      
      
      Hi,
      I feel it necessary to mention that in the UK under LAA rules a mod approval
      will probably be required before fitting this item. I think the device may
      indeed be a good idea but you cannot just fit it without approval.
      
      Pete Jeffers (LAA Inspector for The Europa Club)
      
      PS Rules applicable outside the UK probably differ
      
      -----Original Message-----
      From: owner-europa-list-server@matronics.com
      [mailto:owner-europa-list-server@matronics.com] On Behalf Of JohnFrance
      Sent: 04 December 2017 09:47
      Subject: Europa-List: Re: Rotax Oil Tank Drain Plug
      
      
      Hello Jim and others who might be interested.
      Just to confirm, the drain works well. I drilled a 1.5 mm hole in the casing
      where the circlip washer goes to allow wire locking in position.
      Cheers
      John
      
      [quote="Jim Kelly"]Hi John,
       Please keep me posted Jim Kelly.
      
      
      G-BWEG Classic Taildragger
      
      
       Hello to all, this post made me think I need to fit one of these as well.
       A quick search on the Internet yielded this result from Quick Valve in the
      UK.
       Model F107N has a nipple to allow a tube to be fitted and it costs 23.97
      GBP plus postage. Mine is on it's way.
      
       http://www.quickvalve.co.uk/f107n_details.htm
      (http://www.quickvalve.co.uk/f107n_details.htm)
      
       Regards,
       John
      
       --------
       Europa mono Nr 192
      
      --------
      Europa mono Nr 192
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=476084#476084
      
      
      ---
      This email has been checked for viruses by AVG.
      http://www.avg.com
      
      
 
Other Matronics Email List Services
 
 
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
 
 
-- Please support this service by making your Contribution today! --
  
 |