Today's Message Index:
----------------------
1. 12:26 AM - Re: Wing Movement (JonSmith)
2. 02:11 AM - Re: Re: Wing Movement (Pete Lawless)
3. 04:07 AM - Re: Re: Wing Movement (Robert Borger)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wing Movement |
Hi Keith and Tim,
Thank you very much for posting this. It sounds like excellent advice and I am
going to do this straight away. Nevs tips (bless him) with be around in the
Europa community for a long time I think.
Thanks again, Jon
--------
G-TERN
Classic Mono
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=478104#478104
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wing Movement |
Hi Jon
I solved a slight movement issue with a piece of very thin brass shim
purchased from a model shop. It only take a few thou of movement on the
pin to give a noticeable movement at the tip. A steel washer may be a
bit thick.
Pete
G-RMAC Classic #109
On 19/02/18 08:26, JonSmith wrote:
>
> Hi Keith and Tim,
>
> Thank you very much for posting this. It sounds like excellent advice and I
am going to do this straight away. Nevs tips (bless him) with be around in the
Europa community for a long time I think.
>
> Thanks again, Jon
>
> --------
> G-TERN
> Classic Mono
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=478104#478104
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wing Movement |
> On Feb 19, 2018, at 2:26 AM, JonSmith <jonsmitheuropa@tiscali.co.uk> wrote:
>
>
> Hi Keith and Tim,
>
> Thank you very much for posting this. It sounds like excellent advice and I
am going to do this straight away. Nevs tips (bless him) with be around in the
Europa community for a long time I think.
>
> Thanks again, Jon
>
> --------
> G-TERN
> Classic Mono
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=478104#478104
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|