---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 03/08/18: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:17 AM - Re: ethanol (Hitchflight) 2. 12:50 AM - Re: Europa25Gap International Fly-In, Gap-Tallard, France, June (Remi Guerner) 3. 01:32 AM - Re: Re: Europa25Gap International Fly-In, Gap-Tallard, France, June (James Kelly) 4. 09:15 AM - Vertical Power VP-X Pro (alan_hunter1664) 5. 09:57 AM - Re: Nev's Engine Mount (Roger Sheridan) 6. 09:58 AM - Re: Nev's Engine Mount (Roger Sheridan) 7. 10:44 AM - Re: Nev's Engine Mount (GRAHAM SINGLETON) 8. 11:03 AM - Re: Vertical Power VP-X Pro (davidjoyce@doctors.org.uk) 9. 11:33 AM - Re: Nev's Engine Mount (Michael Davies) ________________________________ Message 1 _____________________________________ Time: 12:17:00 AM PST US Subject: Europa-List: Re: ethanol From: "Hitchflight" Hi Bob Recommend the Briggs and Stratton. Simple low cost and effective. Small enough to be carried around. One UK to two UK pounds. A sensible and cheap solution! And it is reusable! If your local Lawn mower sales place does not stock the tool. Then private message me and I will provide you with the solution. Have one spare tester. Regards Bob Read this topic online here: http://forums.matronics.com/viewtopic.php?p=478493#478493 ________________________________ Message 2 _____________________________________ Time: 12:50:16 AM PST US Subject: Europa-List: Re: Europa25Gap International Fly-In, Gap-Tallard, France, June From: "Remi Guerner" I am planning to publish arrival instructions and suggested routes in time for the Fly-in. But don't worry. The weather in the South Alps is Cavok most of the time with unlimited visibility. When coming from the UK, arriving through Valence (LFLU) is a good option. Fly direct to the S reporting point then follow the valley to the airfield. Again I will provide you with more details later on. Remi Read this topic online here: http://forums.matronics.com/viewtopic.php?p=478494#478494 ________________________________ Message 3 _____________________________________ Time: 01:32:33 AM PST US From: James Kelly Subject: Re: Europa-List: Re: Europa25Gap International Fly-In, Gap-Tallard, France, June Hi Demi, Could you please send me the details of the Europa25Gap. Best wishes Jim Kelly G-BWEG On 8 Mar 2018 8:52 a.m., "Remi Guerner" wrote: > > > I am planning to publish arrival instructions and suggested routes in time > for the Fly-in. But don't worry. The weather in the South Alps is Cavok > most of the time with unlimited visibility. When coming from the UK, > arriving through Valence (LFLU) is a good option. Fly direct to the S > reporting point then follow the valley to the airfield. Again I will > provide you with more details later on. > Remi > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=478494#478494 > > ________________________________ Message 4 _____________________________________ Time: 09:15:58 AM PST US Subject: Europa-List: Vertical Power VP-X Pro From: "alan_hunter1664" I'm thinking of installing in the VP-X Pro vertical power system and the new associated Primary Power System. In the UK would this be considered a modification or is this builders choice like the type of instruments etc? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=478499#478499 ________________________________ Message 5 _____________________________________ Time: 09:57:29 AM PST US From: Roger Sheridan Subject: Re: Europa-List: Nev's Engine Mount Thanks Mike, Carole said the workshop stuff went to Matthew Russell but he says he doesn=99t have the jig. I=99d really like to track down the friend, can you think who might know his identity? Regards, Roger 07540851867 > On 7 Mar 2018, at 08:02, mike.davies210 wrote: > > Hi Roger > I worked with Nev to get the mount approved with the laa. I had two mounts made in his jig one was used for ultimate strain testing and the other went into my aircraft. The last time I spoke to Nev he was having difficulty sourcing the castings for the rubber shock mounts. > I still have a sample of these. I also did the CAD drawing for Nev and still have the file and the stressing report we got approved. The jig went to one of Nev's freinds son who had just got his TIG certificate but I haven't a clue who this was so this doesn't really help sorry. > > Best Regards > > Mike Davies > > > > Sent from Samsung tablet. > > -------- Original message -------- > From: Roger Sheridan > Date: 06/03/2018 20:48 (GMT+00:00) > To: europa-list@matronics.com > Subject: Europa-List: Nev's Engine Mount > > > Dear All, > > I believe that Nev=99s firewall forward design kept the engine in the same location as the XS but with a simpler, one piece, LAA approved engine mount. > > Is there any reason not to use this mount on an XS install & does anyone know who has the jig. > > Regards, > > Roger > > > ________________________________ Message 6 _____________________________________ Time: 09:58:38 AM PST US From: Roger Sheridan Subject: Re: Europa-List: Nev's Engine Mount Sorry! meant to send that direct. > On 8 Mar 2018, at 17:56, Roger Sheridan wrote: > > Thanks Mike, > > Carole said the workshop stuff went to Matthew Russell but he says he doesn=99t have the jig. > I=99d really like to track down the friend, can you think who might know his identity? > > Regards, > > Roger > > 07540851867 > >> On 7 Mar 2018, at 08:02, mike.davies210 > wrote: >> >> Hi Roger >> I worked with Nev to get the mount approved with the laa. I had two mounts made in his jig one was used for ultimate strain testing and the other went into my aircraft. The last time I spoke to Nev he was having difficulty sourcing the castings for the rubber shock mounts. >> I still have a sample of these. I also did the CAD drawing for Nev and still have the file and the stressing report we got approved. The jig went to one of Nev's freinds son who had just got his TIG certificate but I haven't a clue who this was so this doesn't really help sorry. >> >> Best Regards >> >> Mike Davies >> >> >> >> Sent from Samsung tablet. >> >> -------- Original message -------- >> From: Roger Sheridan > >> Date: 06/03/2018 20:48 (GMT+00:00) >> To: europa-list@matronics.com >> Subject: Europa-List: Nev's Engine Mount >> > >> >> Dear All, >> >> I believe that Nev=99s firewall forward design kept the engine in the same location as the XS but with a simpler, one piece, LAA approved engine mount. >> >> Is there any reason not to use this mount on an XS install & does anyone know who has the jig. >> >> Regards, >> >> Roger =========== =========== =========== =========== =========== >> >> >> > ________________________________ Message 7 _____________________________________ Time: 10:44:10 AM PST US From: GRAHAM SINGLETON Subject: Re: Europa-List: Nev's Engine Mount I would think Carole or Nev's son would know the friend? Not Nev's friend?G raham On Thursday, 8 March 2018, 18:00, Roger Sheridan wrote: Sorry! meant to send that direct. On 8 Mar 2018, at 17:56, Roger Sheridan wrote: Thanks Mike, Carole said the workshop stuff went to Matthew Russell but he says he doesn =99t have the jig.I=99d really like to track down the friend, c an you think who might know his identity? Regards, Roger 07540851867 On 7 Mar 2018, at 08:02, mike.davies210 wrote: Hi RogerI worked with Nev to get the mount approved with the laa. I had two mounts made in his jig one was used for ultimate strain testing and the ot her went into my aircraft. The last time I spoke to Nev he was having diffi culty=C2- sourcing the castings for the rubber shock mounts.I still have a sample of these. I also did the CAD drawing for Nev and still have the fi le and the stressing report we got approved. The jig went to one of Nev's f reinds son who had just got his TIG certificate but I haven't a clue who th is was so this doesn't really help sorry. Best Regards Mike Davies Sent from Samsung tablet. -------- Original message --------From: Roger Sheridan Date: 06/03/2018 20:48 (GMT+00:00) To: europa-list@matronics.com Subjec t: Europa-List: Nev's Engine Mount Dear All, I believe that Nev=99s firewall forward design kept the engine in the same location as the XS but with a simpler, one piece, LAA approved engine mount. Is there any reason not to use this mount on an XS install & does anyone kn ow who has the jig. Regards, Roger http://www.matronics.com/Navigator?Europa-List http://wiki.matronics.com http://www.matronics.com/contribution ________________________________ Message 8 _____________________________________ Time: 11:03:31 AM PST US From: davidjoyce@doctors.org.uk Subject: Re: Europa-List: Vertical Power VP-X Pro Alan, I would suggest you ask your inspector. There is clearly a fair bit offreedom in exactly how you wire your electrics, but there is probably the understanding that it needs to conform to standard practise, and he should be able to say whether he would be happy to Sign it off as such. Regards, David Joyce, GXSDJOn 2018-03-08 17:15, alan_hunter1664 wrote: > > I'm thinking of installing in the VP-X Pro vertical power system and the new associated Primary Power System. In the UK would this be considered a modification or is this builders choice like the type of instruments etc? > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=478499#478499 [1] > Links: ------ [1] http://forums.matronics.com/viewtopic.php?p=478499#478499 [2] http://www.matronics.com/Navigator?Europa-List [3] http://forums.matronics.com [4] http://wiki.matronics.com [5] http://www.matronics.com/contribution ________________________________ Message 9 _____________________________________ Time: 11:33:43 AM PST US From: Michael Davies Subject: Re: Europa-List: Nev's Engine Mount No worries! On Thu, 8 Mar 2018, 18:02 Roger Sheridan, wrote: > Sorry! meant to send that direct. > > On 8 Mar 2018, at 17:56, Roger Sheridan wrote: > > Thanks Mike, > > Carole said the workshop stuff went to Matthew Russell but he says he > doesn=99t have the jig. > I=99d really like to track down the friend, can you think who might know his > identity? > > Regards, > > Roger > > 07540851867 > > On 7 Mar 2018, at 08:02, mike.davies210 wrote: > > Hi Roger > I worked with Nev to get the mount approved with the laa. I had two mount s > made in his jig one was used for ultimate strain testing and the other we nt > into my aircraft. The last time I spoke to Nev he was having difficulty > sourcing the castings for the rubber shock mounts. > I still have a sample of these. I also did the CAD drawing for Nev and > still have the file and the stressing report we got approved. The jig wen t > to one of Nev's freinds son who had just got his TIG certificate but I > haven't a clue who this was so this doesn't really help sorry. > > Best Regards > > Mike Davies > > > Sent from Samsung tablet. > > -------- Original message -------- > From: Roger Sheridan > Date: 06/03/2018 20:48 (GMT+00:00) > To: europa-list@matronics.com > Subject: Europa-List: Nev's Engine Mount > > > Dear All, > > I believe that Nev=99s firewall forward design kept the engine in t he same > location as the XS but with a simpler, one piece, LAA approved engine mou nt. > > Is there any reason not to use this mount on an XS install & does anyone > know who has the jig. > > Regards, > > Roger > http://www.matronics.com/Navigator?Europa-List > http://wiki.matronics.com > http://www.matronics.com/contribution > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.