---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 09/04/18: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:01 AM - Re: Aluminium Fuel Pipe (tennant) 2. 03:23 AM - Re: LAA Rally (Paul Mansfield) 3. 12:04 PM - Wing pip pin required (Europa48) 4. 12:49 PM - Aluminium Fuel Pipe (Tim Ward) 5. 04:42 PM - Re: Wing pip pin required (Robert Borger) ________________________________ Message 1 _____________________________________ Time: 03:01:41 AM PST US Subject: Europa-List: Re: Aluminium Fuel Pipe From: "tennant" Hi Rob, I have 50 x 1,0 mm 6061T6 Alu tube in stock. You would only Need a fuel resistant Silicone or rubber 90 & 45 deg bends and any smells disappear. Let me know if it is a possibility for you. Barry -------- Barry Tennant D-EHBT At EDLM - Germany Read this topic online here: http://forums.matronics.com/viewtopic.php?p=482900#482900 ________________________________ Message 2 _____________________________________ Time: 03:23:43 AM PST US From: Paul Mansfield Subject: RE: Europa-List: LAA Rally It seems my first attempt at this got mangled between HTML, Outlook and Matronics... here it is again, stop here if you've already seen this: A big vote of thanks to all the Committee for their work, and especially to David for coordinating, tirelessly spreading the word, and being everywhere at once; and Nigel Graham who was not visible, but whose work (power, fridge etc) behind the scenes is invaluable. Too many to name all the others who helped, but you know who you are... Good to see so many old(!) and new friends and thanks to all for a great weekend! Paul M XS Mono 383 (neeeearly ready to test) From: owner-europa-list-server@matronics.com On Behalf Of davidjoyce@doctors.org.uk Sent: 03 September 2018 11:25 Subject: Europa-List: LAA Rally We had a very enjoyable LAA Rally, helped of course by perfect weather. The Europa Club marquee was busy throughout the three days and it was good to see so many old friends. 65 members signed the register of attendees and a fair few more by passed it and homed in on the coffee and biscuits! It was particularly good to welcome friends from Holland, France and Belgium. We signed up several new members. The judging for the LAA Cup for best Europa at the rally was very close but the winner was Bob Dawson's Snow Goose, G-NHRJ. He will receive the cup at the LAA AGM. Runners up were Dave Disney, G-RJWX; John Wighton, G-IPOD & Roger Grainger, G-CICA, all of whom will get certificates of Commendation from the LAA. Hearty congratulations to them all, and thanks to my fellow judges, Remi Guerner and Peter Kember. We have very nearly sold out of the Europa 25 commemorative mugs but have a few left for anyone who wants one at 5 a go Happy Flying, David Joyce, G-XSDJ, Chairman Europa Club ________________________________ Message 3 _____________________________________ Time: 12:04:52 PM PST US Subject: Europa-List: Wing pip pin required From: "Europa48" Somehow during transporting my Europa XS to have a new permit done I have managed to lose a wing pip pin. Does anyone have a spare they can sell me or advise where I can obtain one? Thanks David Read this topic online here: http://forums.matronics.com/viewtopic.php?p=482909#482909 ________________________________ Message 4 _____________________________________ Time: 12:49:21 PM PST US From: Tim Ward Subject: Europa-List: Aluminium Fuel Pipe Hi Europaeans, Only got two left which I can bring with me to post to the USA, or Canada, a nd then on to the UK next week. This is most likely the last batch I will do. UK LAA approved. =C2=A325 plus postage See UK Europa Club website for details under: https://www.theeuropaclub.org/the-club/sales-and-spares-member-adverts/xs-al uminium-fuel-bend Cheers, Tim Tim Ward 12 Waiwetu Street, Fendalton, Christchurch, 8052 New Zealand ward.t@xtra.co.nz Mob +64 210640221 ________________________________ Message 5 _____________________________________ Time: 04:42:47 PM PST US Subject: Re: Europa-List: Wing pip pin required From: Robert Borger David, I assume you mean the small pip pin for the tie bar socket and not the big pip pin that passes through the spar. I believe one should be available from Europa for about 45. If you can not source the small pip pin on your side of the pond, I have an extra I can pass across to you for cost ($44) plus shipping (?). Probably end up about the same cost as one from Europa. Blue skies & tailwinds, Bob Borger Europa XS Tri, Rotax 914, Airmaster C/S Prop (130 hrs). Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP, Hercules Prop. 3705 Lynchburg Dr. Corinth, TX 76208-5331 Cel: 817-992-1117 rlborger@mac.com On Sep 4, 2018, at 2:04 PM, Europa48 wrote: Somehow during transporting my Europa XS to have a new permit done I have managed to lose a wing pip pin. Does anyone have a spare they can sell me or advise where I can obtain one? Thanks David ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.