---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Mon 11/19/18: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 04:28 AM - LOC (Matt Dralle) 1. 03:35 AM - Re: lock-wiring 912 sump banjo bolt (Nigel Graham) 2. 03:52 AM - Re: lock-wiring 912 sump banjo bolt (Nigel Graham) 3. 05:32 AM - Re: order of assembly for cooling duct, radiators and hoses (h&jeuropa) 4. 05:45 AM - Re: Re: order of assembly for cooling duct, radiators and hoses (Rowland Carson) 5. 03:32 PM - Re: lock-wiring 912 sump banjo bolt (Rowland_Carson) 6. 04:08 PM - Re: Re: lock-wiring 912 sump banjo bolt (Rowland Carson) ________________________________ Message 0 _____________________________________ Time: 04:28:43 AM PST US From: Matt Dralle Subject: Europa-List: LOC Dear Listers, Each year at the end of the List Fund Raiser, I post a message acknowledging everyone that so generously made a Contribution to support the Lists. Its sort of my way of publicly thanking everyone that took a minute to show their appreciation for the Lists. Won't you take a moment and assure that your name is on that List of Contributors (LOC)? As a number of members have pointed out over the years, the List seems at least - if not a whole lot more - valuable as a building/flying/recreating/entertainment tool as your typical magazine subscription! Please take minute and assure that your name is on this year's LOC! Show others that you appreciate the Lists. Making a Contribution to support the Lists is fast and easy using your Credit card or Paypal on the Secure Web Site: http://www.matronics.com/contribution or by popping a personal check in the mail to: Matronics Email Lists c/o Matt Dralle 581 Jeannie Way Livermore CA 94550 I would like to thank everyone that has so generously made a Contribution thus far in this year's List Fund Raiser! Remember that its YOUR support that keeps these Lists going and improving! Don't forget to include a little comment about how the Lists have helped you! Best regards, Matt Dralle Email List Administrator ________________________________ Message 1 _____________________________________ Time: 03:35:38 AM PST US Subject: Europa-List: Re: lock-wiring 912 sump banjo bolt From: "Nigel Graham" Richard is correct - in fact there are two holes ! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485225#485225 Attachments: http://forums.matronics.com//files/wirelock_hole_148.jpg ________________________________ Message 2 _____________________________________ Time: 03:52:48 AM PST US Subject: Europa-List: Re: lock-wiring 912 sump banjo bolt From: "Nigel Graham" ........................at the front, and one at the rear. .... good recovery I thought ;-) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485226#485226 Attachments: http://forums.matronics.com//files/wirelock_hole_rear_137.jpg ________________________________ Message 3 _____________________________________ Time: 05:32:00 AM PST US Subject: Europa-List: Re: order of assembly for cooling duct, radiators and hoses From: "h&jeuropa" Rowland, We just took the engine (914) and factory cowl/duct off our XS for maintenance, so got reacquainted with the sequence. We mount the oil cooler in the duct first. It is on spacers so it sits low. Attach the duct with the bolts to the footwells, so it is located but can still pivot on those. Attach the oil lines to the cooler. Access to the fittings is good. Install the coolant radiator. It will need washers for spacers on the sides. We use a product called Stick It temporary adhesive (its a sticky adhesive but heavy grease would work too) to hold the washers in place. The radiator mounts up high in the duct. We added a drain fitting on the bottom port side of the radiator. It makes it a lot easier and less mess when subsequently removing the radiator. Swing the duct into place and attach the coolant hoses. Use clamps with hex screws and you can reach them with a long extension. We reach the clamps from the port side. Attach the side plates (CD4 & CD5) to the footwells and secure the duct with the side bolts. Be sure you have nutplates on the interior of the duct for these. With the factory setup it is important that all the air entering the duct goes through the radiators; there can be no air leaks. We use aluminum tape, rubber strips and weather stripping. We even tape between the bottom of the coolant radiator and the top of the oil cooler. We fit Thermo Shield on all hoses. Jim & Heather Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485305#485305 ________________________________ Message 4 _____________________________________ Time: 05:45:24 AM PST US From: Rowland Carson Subject: Re: Europa-List: Re: order of assembly for cooling duct, radiators and hoses On 2018-11-19, at 13:31, h&jeuropa wrote: > We just took the engine (914) and factory cowl/duct off our XS for maintenance, so got reacquainted with the sequence. Jim - thats all very useful advice, thanks, and supports my own tentative thoughts on the process. in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson ________________________________ Message 5 _____________________________________ Time: 03:32:13 PM PST US Subject: Europa-List: Re: lock-wiring 912 sump banjo bolt From: "Rowland_Carson" [quote="Richard Wheelwright"] There should be a small hole along the sump seam close to the banjo. There is on my engine [/quote] And there is on mine too! How did I miss that when I first looked??? Thanks for the advice and for not calling me an idiot! in friendship Rowland Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485319#485319 ________________________________ Message 6 _____________________________________ Time: 04:08:47 PM PST US From: Rowland Carson Subject: Re: Europa-List: Re: lock-wiring 912 sump banjo bolt On 2018-11-19, at 23:31, Rowland_Carson wrote: [snip] Dont know how the Matronics list still has that e-mail address - it stopped being used many years ago - so please dont use it. Its to reach me now. in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.