Today's Message Index:
----------------------
1. 12:12 AM - Re: Re: DOTH Dunkeswell (A Milne)
2. 04:04 AM - Re: DOTH Dunkeswell (BobD)
3. 04:13 AM - Re: Re: DOTH Dunkeswell (Richard Scanlan)
4. 05:36 AM - Re: Re: DOTH Dunkeswell (davidjoyce@doctors.org.uk)
5. 06:54 AM - Dunkeswell DOTH (davidjoyce@doctors.org.uk)
6. 10:37 AM - Re: GS tailwheel rudder drive mod question. (Kelvin Weston)
7. 03:12 PM - Re: DOTH Dunkeswell (BobD)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: DOTH Dunkeswell |
I=99m on.
Alasdair
> On 28 Jan 2019, at 12:41, davidjoyce@doctors.org.uk wrote:
>
> A/F confirms restaurant open and no parachuting this week. DJ
>
>
>
> On 2019-01-28 10:17, davidjoyce@doctors.org.uk wrote:
>
>> If current good Wx forecast holds I propose a DOTH to Dunkeswell on
Wednesday 30th Jan. Free landing voucher in LAA mag. Said to have a good
restaurant.
>>
>> Regards, David Joyce, GXSDJ
>>
>>
>>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: DOTH Dunkeswell |
What's DOTH ? Obviously, I'm not "down with the kids" on this particular acronym
[Embarassed]
--------
Bob Dawson
Europa XS TG || 912 ULS || G-NHRJ || Dynon Skyview || PilotAware || SmartAss3
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=487337#487337
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: DOTH Dunkeswell |
=98Drop of the Hat=99 Bob!
> On 29 Jan 2019, at 12:03, BobD <rjd@bobdawson.plus.com> wrote:
>
>
> What's DOTH ? Obviously, I'm not "down with the kids" on this
particular acronym [Embarassed]
>
> --------
> Bob Dawson
> Europa XS TG || 912 ULS || G-NHRJ || Dynon Skyview || PilotAware ||
SmartAss3
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=487337#487337
>
>
>
>
>
>
>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: DOTH Dunkeswell |
Bob, It's a 'Drop of the Hat' fly out. There were lots in the 2000s but
they have largely disappeared. The basic idea is that someone picks a
day with good weather prospects and picks a destination with a
restaurant and a free landing token in one of the aviation mags and then
posts his proposal. Historically anywhere between 3 and 10 planes would
turn up. It was a way of meeting up with your mates, having a purpose in
your flying and being encouraged to visit new places. I feel the format
is well due for a revival. Whether tomorrow's weather is up to
justifying the choice of the day for a relaunch remains to be seen. What
had looked like being wall to wall sunshine now seems to offer fairly
frequent snow showers over the South West and it is likely that I shall
later cancel my proposal for tomorrow.
Regards, David
On 2019-01-29 12:03, BobD wrote:
>
> What's DOTH ? Obviously, I'm not "down with the kids" on this particular acronym
[Embarassed]
>
> --------
> Bob Dawson
> Europa XS TG || 912 ULS || G-NHRJ || Dynon Skyview || PilotAware || SmartAss3
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=487337#487337 [1]
>
Links:
------
[1] http://forums.matronics.com/viewtopic.php?p=487337#487337
[2] http://www.matronics.com/Navigator?Europa-List
[3] http://forums.matronics.com
[4] http://wiki.matronics.com
[5] http://www.matronics.com/contribution
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Sadly the combined weight of BBC, XC, Theyr and Windy all suggest a
significant amount of snow over the SW tomorrow and Windy also suggests
patches of low cloud base, with the scenery of course being quite high
in places. In these circumstances I feel I have to withdraw my
suggestion for the DOTH.
Regards, David Joyce, GXSDJ
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: GS tailwheel rudder drive mod question. |
Hi Pete
If you put a straight edge on the tip and measure along the inside of the leading
edge (next to the hinges), my rudder measures 48 inches from the straight edge
to the centre of the pushrod bracket.
Similarly, if you put the bottom of the rudder on the floor and measure up the
inside of the leading edge from the floor to the centre of the bracket it is 6
inches.
However, the bracket position is determined by the lower hinge position on the
rudder. If you have that in the right place as shown in Chapter 2 of the Build
Manual, you should be ok.
Hope this helps.
--------
Regards
Kelv Weston
Kit 497
kelv@kdweston.biz
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=487355#487355
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: DOTH Dunkeswell |
David, that's a great idea and well worth resurrecting. It's a shame tomorrow's
event has been cancelled due to weather, but I hope to partake in the future.
--------
Bob Dawson
Europa XS TG || 912 ULS || G-NHRJ || Dynon Skyview || PilotAware || SmartAss3
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=487357#487357
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|