---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Mon 03/04/19: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:28 AM - Re: I'm puzzled, again! (Remi Guerner) 2. 12:07 PM - Re: I'm puzzled, again! (JonathanMilbank) 3. 02:54 PM - Manifold pressure (Eoin Maguire) ________________________________ Message 1 _____________________________________ Time: 09:28:19 AM PST US Subject: Europa-List: Re: I'm puzzled, again! From: "Remi Guerner" As an addition to my previous post regarding the kick-back problem, I believe it is useful to add the following regarding the sprag clutch replacement. After reviewing the different issues of the 912 IPC, from 2017 up to now, I discovered that Rotax has made several changes in that area over the years. The sprag clutch itself has not been changed but the sprag clutch housing was modified several times. Housing P/N 852405 was introduced in May 2008 with the following comment: "new housing with expanded space for sprag clutch". Then in January 2017, P/N 852406 was introduced with the very same comment. I guess the changes were designed to improve the behaviour of the sprag clutch. My conclusion: when replacing the sprag clutch, it is critical to replace also the housing and make sure the P/N is the last version. Remi Read this topic online here: http://forums.matronics.com/viewtopic.php?p=487913#487913 ________________________________ Message 2 _____________________________________ Time: 12:07:41 PM PST US Subject: Europa-List: Re: I'm puzzled, again! From: "JonathanMilbank" Thanks also for this latest observation, Remi. Next time that I need to replace the sprag clutch, I'll keep the housing issue in mind. But "next time" will hopefully be a very long time! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=487915#487915 ________________________________ Message 3 _____________________________________ Time: 02:54:04 PM PST US From: Eoin Maguire Subject: Europa-List: Manifold pressure Hi All Does anyone know the correct spec piping for manifold pressure to gauge plumbing ? Kind Regards Eoin Sent from my iPhone ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.