Today's Message Index:
----------------------
 
     1. 04:16 AM - Re: Flaps actuator potentiometer (carlp101)
     2. 11:35 AM - Re: Foam wing; uk approved nav light fixing method (carlp101)
     3. 02:34 PM - Re: Throttle Lever Housing for Jabiru engine (tonyvaccarella)
     4. 02:37 PM - Re: Throttle Lever Housing for Jabiru engine (tonyvaccarella)
     5. 03:18 PM - Mono brake caliper (spcialeffects)
 
 
 

Message 1


					INDEX
 Back to Main INDEX
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
04:16:47 AM PST US
Subject: 
Re: Flaps actuator potentiometer
From: 
"carlp101" <cparkinson@cisc-uk.com>
      
      
      Hi Emmanuel,
      
      I fitted a slider type potentiometer to my XS to allow my Dynon Skyview EFIS to
      display the flap position. I've attached a picture. You can get them from suppliers
      like RS Components. I just drilled a small hole in the flap arm to attach
      the slider arm and then bonded the unit to the fuselage. 
      
      Hope this helps.
      
      Carl
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=489093#489093
      
      
      Attachments: 
      
      http://forums.matronics.com//files/20181112_174530_1_1_resized_148.jpg
      
      

Message 2


					INDEX
 Back to Main INDEX
				PREVIOUS
 Skip to PREVIOUS Message
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
11:35:43 AM PST US
Subject: 
Re: Foam wing; uk approved nav light fixing method
From: 
"carlp101" <cparkinson@cisc-uk.com>
      
      
      Hi Graham,
      
      I fixed nav/strobe lights to by Europa foam wings. Check out the latest Europa
      Flyer. I wrote an article about getting my bird IMC & night approved. This includes
      a description of how I routed the cable. The LAA mod number is 14396 - Strobes
      and nav lights (attached).
      
      Regards 
      Carl
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=489094#489094
      
      
      Attachments: 
      
      http://forums.matronics.com//files/laa_mod_3__wing_tip_strobes_mod_application__signed_553.pdf
      
      

Message 3


					INDEX
 Back to Main INDEX
				PREVIOUS
 Skip to PREVIOUS Message
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
02:34:34 PM PST US
Subject: 
Re: Throttle Lever Housing for Jabiru engine
From: 
"tonyvaccarella" <tony@weimagine.com.au>
      
      
      Hi Rick,
      
      I see your images. Thank you for those and I will have a look at the McFarlane
      vernier throttles. I appreciate your help.
      
      Best regards
      Tony
      
      --------
      Tony Vaccarella
      Mascot NSW 2020
      Sydney Australia
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=489096#489096
      
      

Message 4


					INDEX
 Back to Main INDEX
				PREVIOUS
 Skip to PREVIOUS Message
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
02:37:39 PM PST US
Subject: 
Re: Throttle Lever Housing for Jabiru engine
From: 
"tonyvaccarella" <tony@weimagine.com.au>
      
      
      Hi Rick,
      
      I see your images. Thank you for those and I will have a look at the McFarlane
      vernier throttles. I appreciate your help.
      
      Best regards
      Tony
      
      --------
      Tony Vaccarella
      Mascot NSW 2020
      Sydney Australia
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=489095#489095
      
      

Message 5


					INDEX
 Back to Main INDEX
				PREVIOUS
 Skip to PREVIOUS Message
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
03:18:11 PM PST US
Subject: 
Mono brake caliper
From: 
"spcialeffects" <spcialeffects@aol.com>
      
      
      Hi all. Looking for a brake caliper for the mono. Please pm me with cost.
      
      Many thanks frank
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=489097#489097
      
      








Other Matronics Email List Services




Post A New Message
  
europa-list@matronics.com
UN/SUBSCRIBE
  
http://www.matronics.com/subscription
List FAQ
  
http://www.matronics.com/FAQ/Europa-List.htm
Web Forum Interface To Lists
  
http://forums.matronics.com
Matronics List Wiki
  
http://wiki.matronics.com
7-Day List Browse
  
http://www.matronics.com/browse/europa-list
Browse Europa-List Digests
  
http://www.matronics.com/digest/europa-list
Browse Other Lists
  
http://www.matronics.com/browse
Live Online Chat!
  
http://www.matronics.com/chat
Archive Downloading
  
http://www.matronics.com/archives
Photo Share
  
http://www.matronics.com/photoshare
Other Email Lists
  
http://www.matronics.com/emaillists
Contributions
  
http://www.matronics.com/contribution









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --