Today's Message Index:
----------------------
1. 02:45 AM - Re: Has anyone had corrosion problems on flap cross tube? (rparigoris)
2. 05:04 AM - Re: Fly-In West Virginia, July 4th Weekend (h&jeuropa)
3. 01:45 PM - Europa Club AGM and Dinner 29 July (davidjoyce@doctors.org.uk)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Has anyone had corrosion problems on flap cross tube? |
Hi Group
Thx. for replies. My flap cross tube is installed but baggage bay not yet in. I
drilled a .100" hole in situation. The way I did it was I used an air powered
angle drill. I first put a piece of 3M 375 packaging tape on the bottom of the
tube then scuff sanded it with 80 grit. I took a piece of aluminium rod and
drilled a .100" hole in it, it was about1/2" long, then JB KWIK Welded it to the
tape. I had the flap tube in the down position using my EyeChrometer to get
drill jig vertical and in the middle of bend. After cure put cross tube in up
position and drilled hole. ACF 50 with extension tube once in a while while blowing
and sucking is a good idea also too.
Ron P.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=489996#489996
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fly-In West Virginia, July 4th Weekend |
Given the weekend weather forecast for flash floods and heavy precip, we've decided
this doesn't sound like a good camping weekend.
We'll look for other adventures to share with Europa owners.
Jim & Heather
Do Not Archive
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=489997#489997
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Europa Club AGM and Dinner 29 July |
Just a reminder that the EuropaClub Fly in to Wellesbourne Mountford,
AGM, Talk by Andy Draper and Annual Dinner is on 29 July. Full details
are on the web site but PLEASE NOTE the hotel requires dinner orders two
weeks ahead so if coming you need to follow the instructions and get
your details to me by 14 July. Regards, David Joyce, GXSDJ
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|