---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 10/27/19: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:32 AM - Re: AW: AoA - Angle of Attack Indicator (carlp101) 2. 02:37 AM - Re: Toasty Cabin Heater for XS CKT Exhaust (olihqt) 3. 02:57 AM - Re: Toasty Cabin Heater for XS CKT Exhaust (spcialeffects) 4. 04:44 AM - Re: Re: Toasty Cabin Heater for XS CKT Exhaust (Bob Harrison) 5. 04:49 AM - Re: Toasty Cabin Heater for XS CKT Exhaust (carlp101) 6. 05:15 AM - Re: AoA - Angle of Attack Indicator (D McFadyean) 7. 06:49 AM - Re: Toasty Cabin Heater for XS CKT Exhaust (spcialeffects) 8. 11:49 AM - Re: Toasty Cabin Heater for XS CKT Exhaust (carlp101) 9. 04:24 PM - Re: AoA - Angle of Attack Indicator (keithbevhickling) ________________________________ Message 1 _____________________________________ Time: 12:32:07 AM PST US Subject: Europa-List: Re: AW: AoA - Angle of Attack Indicator From: "carlp101" Hi James, When you go through the calibration of the Dynon AoA probe you stall the plane in various configurations - no flaps, full flaps etc. The result is a very effective gauge. As I was replacing my existing non-AoA probe so I already had two tubes routed through the wing (static & dynamic pressure). I used those for dynamic pressure & AoA. I located a static pressure sensor to the fuselage instead. All the best. Carl Read this topic online here: http://forums.matronics.com/viewtopic.php?p=491995#491995 ________________________________ Message 2 _____________________________________ Time: 02:37:33 AM PST US Subject: Europa-List: Re: Toasty Cabin Heater for XS CKT Exhaust From: "olihqt" Waouh! Its a great job ! Ill try it. do you think there is no risk for the system to perfore the exhaust with the vibrations? Many thanks for share it. Olivier Read this topic online here: http://forums.matronics.com/viewtopic.php?p=491997#491997 ________________________________ Message 3 _____________________________________ Time: 02:57:28 AM PST US Subject: Europa-List: Re: Toasty Cabin Heater for XS CKT Exhaust From: "spcialeffects" Looks very nice Carl. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=491998#491998 ________________________________ Message 4 _____________________________________ Time: 04:44:28 AM PST US From: "Bob Harrison" Subject: RE: Europa-List: Re: Toasty Cabin Heater for XS CKT Exhaust Hi! All Be sure to embody a carbon monoxide alert any such system that hugs the exhaust system is likely to ingest a slow death as a passenger for you, but I guess you would die warm !!!!! Regards BoB Harrison. -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of olihqt Sent: 27 October 2019 09:37 Subject: Europa-List: Re: Toasty Cabin Heater for XS CKT Exhaust Waouh! Its a great job ! Ill try it. do you think there is no risk for the system to perfore the exhaust with the vibrations? Many thanks for share it. Olivier Read this topic online here: http://forums.matronics.com/viewtopic.php?p=491997#491997 -- This email has been checked for viruses by AVG. https://www.avg.com ________________________________ Message 5 _____________________________________ Time: 04:49:34 AM PST US Subject: Europa-List: Re: Toasty Cabin Heater for XS CKT Exhaust From: "carlp101" :D Read this topic online here: http://forums.matronics.com/viewtopic.php?p=492000#492000 ________________________________ Message 6 _____________________________________ Time: 05:15:57 AM PST US From: D McFadyean Subject: Re: Europa-List: AoA - Angle of Attack Indicator Yes. Rite_Angle III. Couldn't get it to work. Duncan McF. > On 25 October 2019 at 22:30 Mallard wrote: > > > > Has anyone ever fitted an AoA Indicator to their Europa? If yes, what model did you fit and was there a reason why you selected that particular model? > > Cheers > James > > -------- > Seat of my pants > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=491973#491973 > > > > > > > > > ________________________________ Message 7 _____________________________________ Time: 06:49:09 AM PST US Subject: Europa-List: Re: Toasty Cabin Heater for XS CKT Exhaust From: "spcialeffects" How about the LAA side of things?? Did you apply for a mod? Whats the number? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=492002#492002 ________________________________ Message 8 _____________________________________ Time: 11:49:15 AM PST US Subject: Europa-List: Re: Toasty Cabin Heater for XS CKT Exhaust From: "carlp101" I haven't applied for a mod yet. I wanted to get it working first, so I've ground run it and works very well. I might make another valve to let cold air into the system. My first attempt doesn't work as well as I'd hoped. Anyway, I'll put a mod request once it's all perfected. All the best. Carl Read this topic online here: http://forums.matronics.com/viewtopic.php?p=492005#492005 ________________________________ Message 9 _____________________________________ Time: 04:24:25 PM PST US From: "keithbevhickling" Subject: Re: Europa-List: AoA - Angle of Attack Indicator Hi Mallard, I fitted the Advanced Flight Systems AOA Sport, which uses the differential pressure between 2 pressure ports on the upper and lower wing surface as well as the pitot and static pressures. It can be separately calibrated for both flaps up and down. It is an adaption of a US Navy system. It works well although it has only 8 LED indicators (red, orange green) so the resolution is not very high. But it does indicate impending stall, even in a high g manoeuvre. The newer version of the aoa pro system apparently uses the Dynon aoa probe instead of the pressure ports, but I think the sport still uses the pressure ports. https://www.advancedflightsystems.com/advanced-aoa.php Regards, Keith. -----Original Message----- From: Mallard Sent: Saturday, October 26, 2019 10:30 AM Subject: Europa-List: AoA - Angle of Attack Indicator Has anyone ever fitted an AoA Indicator to their Europa? If yes, what model did you fit and was there a reason why you selected that particular model? Cheers James -------- Seat of my pants Read this topic online here: http://forums.matronics.com/viewtopic.php?p=491973#491973 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.