---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 11/17/19: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 12:43 PM - Coming Soon - The List of Contributors - Please Make A Contribution Today! (Matt Dralle) 1. 03:46 AM - Re: Europa trailer loan (and driver) wanted (carlp101) 2. 05:51 AM - Re: Control stick tube height (Bob Harrison) 3. 08:49 AM - Container contingency (Hitchflight) 4. 04:05 PM - Re: Container contingency (JonathanMilbank) ________________________________ Message 0 _____________________________________ Time: 12:43:06 PM PST US From: Matt Dralle Subject: Europa-List: Coming Soon - The List of Contributors - Please Make A Contribution Today! Each year at the end of the List Fund Raiser, I post a message acknowledging everyone that so generously made a Contribution to support the Lists. Its my way of publicly thanking everyone that took a minute to show their appreciation for the Lists. Please take a moment and assure that your name is on that List of Contributors (LOC)! As a number of members have pointed out over the years, the List seems at least as valuable a building / entertainment tool as your typical magazine subscription! Assure that your name is on this year's LOC! Show others that you appreciate the Lists. Making a Contribution to support the Lists is fast and easy using your Credit card or Paypal on the Secure Web Site: http://www.matronics.com/contribution or by dropping a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 I would like to thank everyone that has so generously made a Contribution thus far in this year's List Fund Raiser! Remember that its YOUR support that keeps these Lists going and improving! Don't forget to include a little comment about how the Lists have helped you! Best regards, Matt Dralle Matronics Email List Administrator ________________________________ Message 1 _____________________________________ Time: 03:46:55 AM PST US Subject: Europa-List: Re: Europa trailer loan (and driver) wanted From: "carlp101" I have a dedicated tr trailor you're welcome to borrow. Call me on 07810 565195 Regards Carl Read this topic online here: http://forums.matronics.com/viewtopic.php?p=493004#493004 ________________________________ Message 2 _____________________________________ Time: 05:51:56 AM PST US From: "Bob Harrison" Subject: RE: Europa-List: Control stick tube height DONT SIZE YOUR CONTROL STICK UNTIL YOU HAVE VERIFIED IT CLEARS THE PANEL AND SWITCHES IN FULL DIVE MODE, REMEMBERING CLEARANCE FOR YOUR KNUCKES AND SWITCHES. REGARDS BOB HARRISON . -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Kingsley Hurst Sent: 15 November 2019 01:30 Subject: Re: Europa-List: Control stick tube height Chris, I have measured from floor to top of sticks on two aircraft for you . . . . . . one is 19.7" and the other 20.9" so take your pick! IMO, your 19" is plenty long enough. Regards Kingsley in Oz On 15.11.19 8:42 am, n7188u wrote: > > Dear forum members, > > My control sticks seems to have modified at their end to fit Infinity grips (which I am not going to use) and I need to check whether they were cut down to make them shorter or not. > > I measured 19 inches from the floor to the top of the stick tube when the stick was about vertical. > > Is this correct or if not how much was the stick cut down? > > Regards, > Chris ________________________________ Message 3 _____________________________________ Time: 08:49:48 AM PST US Subject: Europa-List: Container contingency From: "Hitchflight" As part of contingency preparation for a prospective trip I would like to check the feasibility of fitting a Europa XS Mono in a 20 container. The 20 container is attractive, in that the Europa would just fit in as a complete aircraft with wings detached. Assume the availability of a fuselage cradle, strapping and air bags to fill the remaining void. Perhaps someone is currently using a 20 container as a hanger? The key point appears to be the difference between length of the aircraft fuselage and the available internal length of the container. The remainder is 50mm not much margin for error! On paper it should work? But how does the prospective solution look in the real world? Diagram attached. Regards Bob Read this topic online here: http://forums.matronics.com/viewtopic.php?p=493006#493006 Attachments: http://forums.matronics.com//files/ee958a1a_b7de_4478_ac12_16a99ef911a9_114.jpeg ________________________________ Message 4 _____________________________________ Time: 04:05:57 PM PST US Subject: Europa-List: Re: Container contingency From: "JonathanMilbank" The rudder's easy enough to remove. So's the spinner! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=493089#493089 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.