----------------------------------------------------------
                           Europa-List Digest Archive
                                      ---
                     Total Messages Posted Sun 08/16/20: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 07:55 AM - Airmaster EU/Dirk Oyen: Credit where credit is due.  (Rick Moss)
     2. 09:48 PM - Garmin G3X or G5 Autopilot installation  (tonyvaccarella)
 
 
 
________________________________  Message 1  _____________________________________


Time: 07:55:31 AM PST US
Subject: Europa-List: Airmaster EU/Dirk Oyen: Credit where credit is due.
From: "Rick Moss" <Rkwmoss@gmail.com>


Following a steady increase in the rate of grease coming out of my 18 year old
Airmaster prop hub and landing on the windscreen, I contacted Dirk at Airmaster
EU. Within a week, a set of "courtesy blades" had been delivered to me in Britain,
and my blades were in Belgium awaiting some parts and a service, along
with a sensible estimate for the works.

I'm well impressed with that! I went flying yesterday with the loaner-blades fitted,
and my machine felt smoother than it has in a while. 

Cheers Dirk!


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=497783#497783


________________________________  Message 2  _____________________________________


Time: 09:48:12 PM PST US
Subject: Europa-List: Garmin G3X or G5 Autopilot installation
From: "tonyvaccarella" <tony@weimagine.com.au>


Hi all,
Im in the process of installing a pair of Garmin G5 instruments (Attitude Indicator
and DG) and a Garmin Autopilot. Part of the configuration process is to enter
the gains for the Roll and the Pitch servos. This is conducted by doing a
number of test flights and adjusting the gains until the autopilots seems to
behave properly.

Have any Europa builders installed a Garmin Experimental auto? If so, would you
mind sharing your configuration data to overcome the need to conduct a lengthy
calibration process?

Best regards,
Tony Vaccarfella

--------
Tony Vaccarella
Mascot NSW 2020
Sydney Australia


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=497791#497791


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               europa-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Europa-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/europa-list
Browse Digests                   http://www.matronics.com/digest/europa-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.