---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 11/24/20: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:13 AM - Re: replacement glass () 2. 02:35 AM - Re: replacement glass (Mike) 3. 07:41 PM - Rotax 914 4mm x 7mm hose (rparigoris) ________________________________ Message 1 _____________________________________ Time: 02:13:37 AM PST US From: Subject: RE: Europa-List: replacement glass Hi Mike, I have a new pax door clear canopy in stock. You can have it for 150 which is less than the shipping cost from LP Aero in the US. Kindest Regard Ivan -----Original Message----- From: owner-europa-list-server@matronics.com On Behalf Of Monoman Sent: 23 November 2020 16:51 Subject: Europa-List: replacement glass Hello All This spring I managed to break the glass in the passenger side door of my classic mono, a long story. I got it repaired and although this is reasonable the crack is still clearly visible and I would like to get rid of it altogether. I managed to purchase a couple of used XS doors which of course are tinted but I think looked a lot better. However my mono has had the cockpit width mod done and while fitting the new doors what I thought might be an easy fit has now turned into quite a difficult amount of work. I am thinking now that it might be easier just to replace the glass in the original door? So to the question, does anyone have just the original classic clear glass for the passenger side or can direct me to where I might get one? I am not averse to replacing both sides with XS tinted if clear glass is now unobtainable, but it would come down to cost. I have been told that they are only now made new in the States and that there is a massive lead time in obtaining them, is this true? I should say that although I have previously built an aircraft, I did not build my Europa. Thanks Mike G-DURO Read this topic online here: http://forums.matronics.com/viewtopic.php?p=499479#499479 ________________________________ Message 2 _____________________________________ Time: 02:35:06 AM PST US From: "Mike" Subject: RE: Europa-List: replacement glass Hello Ivan Thanks very much for that, yes I will take it please. Can you Private message me with your details and your preferred method of collection? Cheers Mike PS I must say a thank you to all of you that provided help on this subject, it has been good to hear from you. Matronics has scored again, thanks. -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of ivanshaw@btinternet.com Sent: 24 November 2020 10:12 Subject: RE: Europa-List: replacement glass Hi Mike, I have a new pax door clear canopy in stock. You can have it for 150 which is less than the shipping cost from LP Aero in the US. Kindest Regard Ivan -----Original Message----- From: owner-europa-list-server@matronics.com On Behalf Of Monoman Sent: 23 November 2020 16:51 Subject: Europa-List: replacement glass Hello All This spring I managed to break the glass in the passenger side door of my classic mono, a long story. I got it repaired and although this is reasonable the crack is still clearly visible and I would like to get rid of it altogether. I managed to purchase a couple of used XS doors which of course are tinted but I think looked a lot better. However my mono has had the cockpit width mod done and while fitting the new doors what I thought might be an easy fit has now turned into quite a difficult amount of work. I am thinking now that it might be easier just to replace the glass in the original door? So to the question, does anyone have just the original classic clear glass for the passenger side or can direct me to where I might get one? I am not averse to replacing both sides with XS tinted if clear glass is now unobtainable, but it would come down to cost. I have been told that they are only now made new in the States and that there is a massive lead time in obtaining them, is this true? I should say that although I have previously built an aircraft, I did not build my Europa. Thanks Mike G-DURO Read this topic online here: http://forums.matronics.com/viewtopic.php?p=499479#499479 ________________________________ Message 3 _____________________________________ Time: 07:41:39 PM PST US Subject: Europa-List: Rotax 914 4mm x 7mm hose From: "rparigoris" Hi Group Does anyone know where to get 4mm x 7mm hose used on the 914 airbox? Rotax cost is crazy. McMaster has 4mm x 6mm Viton, wish it was 7mm. Thx. Ron P. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=499507#499507 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.