Europa-List Digest Archive

Mon 01/11/21


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 08:53 AM - Re: Is 160 F too cold? (Erich Trombley)
     2. 03:38 PM - Mono Slave Cyl O-ring (Kingsley Hurst)
     3. 03:39 PM - Mono Slave Cyl O-ring (Kingsley Hurst)
     4. 07:26 PM - Re: Re: Is 160 F too cold? (William Daniell)
     5. 09:10 PM - Buy (20Pieces) Apple iPhone 12 5G 64GB Mini Unlocked $10,580 (matt63867)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:53:59 AM PST US
    From: Erich Trombley <erichdtrombley@juno.com>
    Subject: RE: Is 160 F too cold?
    Hi William, As far as engine damage, I cant say. However, it is outside the recommended temperature range specified by Rotax. I had contemplated installing an oil thermostat to solve the same issue, and decided to fabricate a cowl flap instead. Works very well. I close it off completely for engine start and initial warm up. I then either open or close it to maintain CHT/oil temps in the specified range. As a bonus I pick a few knots in cruise, especially in the winter months when, I have it almost completely closed. In use a small electric actuator to move the flap. I dont have the standard Europa firewall forward, so my installation is different. However, Jim Butcher fabricated a similar cowl flap for the Europa XS. He usually monitors the forum. Regards, Erich ____________________________________________________________ Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more House Democrats Introduce Article of Impeachment http://thirdpartyoffers.juno.com/TGL3131/5ffc823ab415123917e5st01duc1 Promotion for Kim Jong Un, With Possible Dis for Sis http://thirdpartyoffers.juno.com/TGL3131/5ffc823ad8e4223917e5st01duc2 In Letter on Capitol Riot, Melania Trump Swings Back http://thirdpartyoffers.juno.com/TGL3131/5ffc823b91ca23917e5st01duc3


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:38:52 PM PST US
    From: Kingsley Hurst <kingsnjan@westnet.com.au>
    Subject: Mono Slave Cyl O-ring
    Could someone advise the size/Part No of the Mono slave cylinder O ring please. Regards Kingsley in Oz


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:39:36 PM PST US
    From: Kingsley Hurst <kingsnjan@westnet.com.au>
    Subject: Mono Slave Cyl O-ring
    Could someone advise the size/Part No of the Mono slave cylinder O ring please. Regards Kingsley in Oz


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:26:08 PM PST US
    From: William Daniell <wdaniell.longport@gmail.com>
    Subject: Re: RE: Is 160 F too cold?
    Thanks everyone for the responses. A lot to think of. For now i have ordered some high temp tape...while i consider my options. Appreciate all the options offered Will William Daniell +1 786 878 0246 On Mon, Jan 11, 2021, 11:57 Erich Trombley <erichdtrombley@juno.com> wrote: m > > > > Hi William, > > As far as engine damage, I can=99t say. However, it is outside the > recommended temperature range specified by Rotax. I had contemplated > installing an oil thermostat to solve the same issue, and decided to > fabricate a cowl flap instead. Works very well. > > I close it off completely for engine start and initial warm up. I then > either open or close it to maintain CHT/oil temps in the specified range. > As a bonus I pick a few knots in cruise, especially in the winter months > when, I have it almost completely closed. > > In use a small electric actuator to move the flap. I don=99t have the > standard Europa firewall forward, so my installation is different. > However, Jim Butcher fabricated a similar cowl flap for the Europa XS. He > usually monitors the forum. > > Regards, > Erich > > > ____________________________________________________________ > Sponsored by > https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign =rss_taglines_more > > House Democrats Introduce Article of Impeachment > http://thirdpartyoffers.juno.com/TGL3131/5ffc823ab415123917e5st01duc1 > Promotion for Kim Jong Un, With Possible Dis for Sis > http://thirdpartyoffers.juno.com/TGL3131/5ffc823ad8e4223917e5st01duc2 > In Letter on Capitol Riot, Melania Trump Swings Back > http://thirdpartyoffers.juno.com/TGL3131/5ffc823b91ca23917e5st01duc3 > =========== =========== =========== =========== =========== > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:10:40 PM PST US
    Subject: Buy (20Pieces) Apple iPhone 12 5G 64GB Mini Unlocked $10,580
    From: "matt63867" <matt63867@gmail.com>
    Available Now, View Our Site For Best Price List!!! Company Name: Halgatetech 3500 WILSHIRE BLVD Los Angeles CA 90010 USA Email: sales @ halgatetech . com Website: www . halgatetech . com Tel: +1-213-432-4350 Whatsapp: +1-213-460-5996 Buy 5 Pieces Apple iPhone 12 Mini 5G (64GB $3,645, 128GB $3,895, 256GB $4,395) Buy 10 Pieces Apple iPhone 12 Mini 5G (64GB $6,290, 128GB $6,790, 256GB $7,790) Buy 20 Pieces Apple iPhone 12 Mini 5G (64GB $10,580, 128GB $11,580, 256GB $13,580) Buy 30 Pieces Apple iPhone 12 12 Mini 5G (64GB $12,870, 128GB $14,370, 256GB $17,370) Buy 50 Pieces Apple iPhone 12 Mini 5G (64GB $16,450, 128GB $18,950, 256GB $23,950) Buy 100 Pieces Apple iPhone 12 Mini 5G (64GB $22,900, 128GB $27,900, 256GB $37,900) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=500149#500149




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --