Today's Message Index:
----------------------
1. 06:05 PM - Final Aileron Adjustment Question (Jeffrey Williams)
2. 10:14 PM - Re: Final Aileron Adjustment Question (Richard Scanlan)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Final Aileron Adjustment Question |
One of the last things I needed to do before my first flight was to make
sure the ailerons are properly adjusted.
My biggest question concerns the neutral position of the bell crank at
the wing root.
When adjusting this, should I have the trailing edges of ailerons align
with the trailing edges of the wing tips, as the build manual suggests,
or should they be aligned with the trailing edges of the flaps, which
make up a huge portion of the wings=99 actual trailing edges?
The trailing edge of the flaps - in the hard =9Cup=9D
position - are slightly lower than the trailing edge of the little wing
tip. So, as I see it, I cannot align the ailerons to both.
It would seem to me to make more sense to align with the flaps. But that
is NOT what the build manual says to do. How critical is this? Given
that the manual says ailerons go up 23.5=C2=B0, it seems this could make
a difference.
Aligning with the flaps, I meet the tolerances in Annex E based on the
wing tip.
Any thoughts? I would appreciate any helpful comments.
Regards,
Jeff Williams
Builder A157
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Final Aileron Adjustment Question |
Bud Yerly guide on the club website is a good guide to aileron setup
Sent from my iPhone
> On 23 Aug 2021, at 02:04, Jeffrey Williams <jeffwill55@sbcglobal.net> wrot
e:
>
> One of the last things I needed to do before my first flight was to make s
ure the ailerons are properly adjusted.
>
> My biggest question concerns the neutral position of the bell crank at the
wing root.
>
> When adjusting this, should I have the trailing edges of ailerons align wi
th the trailing edges of the wing tips, as the build manual suggests, or sho
uld they be aligned with the trailing edges of the flaps, which make up a hu
ge portion of the wings=99 actual trailing edges?
>
> The trailing edge of the flaps - in the hard =9Cup=9D position
- are slightly lower than the trailing edge of the little wing tip. So, as I
see it, I cannot align the ailerons to both.
>
> It would seem to me to make more sense to align with the flaps. But that i
s NOT what the build manual says to do. How critical is this? Given that the
manual says ailerons go up 23.5=C2=B0, it seems this could make a differenc
e.
>
> Aligning with the flaps, I meet the tolerances in Annex E based on the win
g tip.
>
> Any thoughts? I would appreciate any helpful comments.
>
> Regards,
>
> Jeff Williams
> Builder A157
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|