---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 08/24/21: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:36 AM - Re: Europa-List Digest: 2 Msgs - 08/23/21 (Jeffrey Williams) ________________________________ Message 1 _____________________________________ Time: 07:36:41 AM PST US From: Jeffrey Williams Subject: Europa-List: Re: Europa-List Digest: 2 Msgs - 08/23/21 Richard and William I will go look for that - thanks very much for the tip! Regards, Jeff Williams > On Aug 24, 2021, at 1:35 AM, Europa-List Digest Server wrote: > > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Europa-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Europa-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 21-08-23&Archive=Europa > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 21-08-23&Archive=Europa > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Europa-List Digest Archive > --- > Total Messages Posted Mon 08/23/21: 2 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 05:39 PM - Re: Final Aileron Adjustment Question (William Daniell) > 2. 07:01 PM - Tri gear firewall cooling optimisation (Brian Phillips) > > > > ________________________________ Message 1 _____________________________________ > > > Time: 05:39:35 PM PST US > From: William Daniell > Subject: Re: Europa-List: Final Aileron Adjustment Question > > I second this - I followed the guide and it worked > William Daniell > LONGPORT > +1 786 878 0246 > > > On Sun, Aug 22, 2021 at 10:17 PM Richard Scanlan wrote: > >> Bud Yerly guide on the club website is a good guide to aileron setup >> >> Sent from my iPhone >> >> On 23 Aug 2021, at 02:04, Jeffrey Williams >> wrote: >> >> One of the last things I needed to do before my first flight was to make >> sure the ailerons are properly adjusted. >> >> My biggest question concerns the neutral position of the bell crank at th > e >> wing root. >> >> When adjusting this, should I have the trailing edges of ailerons align >> with the trailing edges of the wing tips, as the build manual suggests, o > r >> should they be aligned with the trailing edges of the flaps, which make u > p >> a huge portion of the wings=99 actual trailing edges? >> >> The trailing edge of the flaps - in the hard =9Cup=9D positio > n - are slightly >> lower than the trailing edge of the little wing tip. So, as I see it, I >> cannot align the ailerons to both. >> >> It would seem to me to make more sense to align with the flaps. But that >> is NOT what the build manual says to do. How critical is this? Given that >> the manual says ailerons go up 23.5=C2=B0, it seems this could make a >> difference. >> >> Aligning with the flaps, I meet the tolerances in Annex E based on the >> wing tip. >> >> Any thoughts? I would appreciate any helpful comments. >> >> Regards, >> >> Jeff Williams >> Builder A157 >> >> > > ________________________________ Message 2 _____________________________________ > > > Time: 07:01:11 PM PST US > From: Brian Phillips > Subject: Europa-List: Tri gear firewall cooling optimisation > > I'm building an XS Trigear, and am trying to work out the firewall > install, Bud recommends the repositioning of the nose gear aft of the > trigear trapeze, to provide 100 square inches of air exit area, which > greatly helps with cooling. I am thinking of incorporating it in into > the xs trigear cockpit module bulkhead. Not sure if I should use ACS > firewall 2000 kit, or 0.4mm Stainless sheet or both. > Does anyone have any shots of what they have done? I'm not really sure > what to do here. > > Brian Phillips > Downunder > > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.