---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Fri 12/03/21: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:13 AM - Re: Arplast PV50 Gear Shims (GTH) 2. 07:59 AM - Re: Securing the aircraft (William Daniell) 3. 12:01 PM - Re: Securing the aircraft (rparigoris) 4. 12:59 PM - Re: Re: Securing the aircraft (William Daniell) 5. 03:38 PM - Re: Rotax Cooling Air Baffle (Paul McAllister) ________________________________ Message 1 _____________________________________ Time: 01:13:16 AM PST US Subject: Re: Europa-List: Arplast PV50 Gear Shims From: GTH Le 02/12/2021 13:43, BobD a crit: > > The shims in the gearbox of my Arplast PV50 Propeller have been chewed up by the gears, resulting in jammed gears. Does anyone have either a full gearbox, or the shims from a gearbox, or know where they can be sourced from ? > > I have found a supplier of shims on E-Bay, but not one that can supply the exact size of the shims, which from measuring appear to be both 0.1mm x id 6mm x od 15mm, and 0.1mm x id 7mm x od 15mm. > Bob, I found this : https://fr.misumi-ec.com/vona2/detail/110300237240/# See the "Cofigurable" paragraph, you can choose the OD, ID and thikness. FWIW, -- -- Best regards Gilles http://contrails.free.fr http://lapierre.skunkworks.free.fr ________________________________ Message 2 _____________________________________ Time: 07:59:13 AM PST US From: William Daniell Subject: Re: Europa-List: Securing the aircraft Fred thanks How nice to hear from you - sorry for silence. I was worried about this issue for my trip from Colombia to USA but in the event nothing happened. I probably should think about securing the doors because i have a a full dynon system...but I am not sure if I can be bothered to re-work the doors etc. I seem to have my hands full with routine maintenance! yours Will William Daniell LONGPORT +1 786 878 0246 On Sat, Nov 13, 2021 at 1:02 AM fklein@orcasonline.com < fklein@orcasonline.com> wrote: > > > On Nov 28, 2018, at 3:38 PM, William Daniell > wrote: > > Has anyone got a clever solution for securing the aircraft doors - for > example in a strange airport overnight? > > > Will, > > Under some guidance from a locksmith, I=99ve installed those cylind rical key > locks often seen on vending machines. > If you=99re interested, I=99ll pull the interior cover plates and take some > photos of the catch which prevents retraction of the shoot bolt. > > Fred > > ________________________________ Message 3 _____________________________________ Time: 12:01:47 PM PST US Subject: Europa-List: Re: Securing the aircraft From: "rparigoris" Hi William We installed a simple striker and safety Torx screw: http://www.europaowners.org/gallery2/v/Begin-06-2003/Cockpit+above+door+sills/album246/porterdoor_6.jpg.html http://www.europaowners.org/gallery2/v/Begin-06-2003/Cockpit+above+door+sills/album246/porterdoor_8.jpg.html May at least keep honest people honest. Ron P. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=505164#505164 ________________________________ Message 4 _____________________________________ Time: 12:59:27 PM PST US From: William Daniell Subject: Re: Europa-List: Re: Securing the aircraft good idea! William Daniell LONGPORT +1 786 878 0246 On Fri, Dec 3, 2021 at 3:05 PM rparigoris wrote: > > Hi William > We installed a simple striker and safety Torx screw: > > http://www.europaowners.org/gallery2/v/Begin-06-2003/Cockpit+above+door+sills/album246/porterdoor_6.jpg.html > > > http://www.europaowners.org/gallery2/v/Begin-06-2003/Cockpit+above+door+sills/album246/porterdoor_8.jpg.html > > May at least keep honest people honest. Ron P. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=505164#505164 > > ________________________________ Message 5 _____________________________________ Time: 03:38:51 PM PST US From: Paul McAllister Subject: Re: Europa-List: Rotax Cooling Air Baffle Ron, I used a plenum from an RV10. I don't know if Vans still sell them or not but I recall that it was not very expensive - Paul On Sun, Oct 24, 2021 at 12:07 PM rparigoris wrote: > > Hi Group Has anyone flying with Rotax Cooling Air Baffle modified the > internal flow to give cylinders #3 and #4 a little more flow compared to > the front two cylinders? How about with a 914 even giving #3 a little more > flow compared to #4? This coming week going to test mine with a leaf > blower. Thx. Ron > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=503607#503607 > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.