Europa-List Digest Archive

Tue 12/14/21


Total Messages Posted: 6



Today's Message Index:
----------------------
 
     1. 06:40 AM - Re: DOTH - Wolverhampton Airport Wednesday 15th Dec. 2021 (Hitchflight)
     2. 08:41 AM - Re: Electrical Hardware (n7188u)
     3. 08:53 AM - Tucson Fly-In & Jack McKenzie's First Flight of N523WS (danbish99)
     4. 10:40 AM - Re: Tucson Fly-In & Jack McKenzie's First Flight of N523WS (Robert Piskorski)
     5. 02:17 PM - Re: Tucson Fly-In & Jack McKenzie's First Flight of N523WS (MIKE CHRISTINE DUANE)
     6. 04:12 PM - Re: Tucson Fly-In & Jack McKenzie's First Flight of N523WS (Vlodek9)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:40:24 AM PST US
    Subject: Re: DOTH - Wolverhampton Airport Wednesday 15th Dec. 2021
    From: "Hitchflight" <bobhitchcock@icloud.com>
    OK for me. Regards Bob Read this topic online here: http://forums.matronics.com/viewtopic.php?p=505251#505251


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:41:46 AM PST US
    Subject: Re: Electrical Hardware
    From: "n7188u" <chmgarb@gmail.com>
    I have used Stein Air a couple of times during my build to get things such as connectors, shells, wires and some specialized electrical components. Their price is good. But Aircraft Spruce is still my main go to for parts because the shipping cost is a little clearer and they are close to my state (FL). Chris Read this topic online here: http://forums.matronics.com/viewtopic.php?p=505257#505257


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:53:53 AM PST US
    Subject: Tucson Fly-In & Jack McKenzie's First Flight of N523WS
    From: "danbish99" <bdanbish@gmail.com>
    December 4th was the first flight of Jack McKenzie's awesome tri-gear, N523WS. The following day we gathered with two other Europas, Erich Trombley flew his monowheel from Las Vegas, NV and Mike Duane flew his conventional gear from Chandler, AZ, followed by a terrific dinner hosted by Jack & Alice McKenzie at their home in Green Valley, AZ just south of Tucson. I put together a video of the event you may have seen already on the Facebook page - you can view it here at https://youtu.be/OiWx4lo8EIs We plan to make this an annual event, probably sometime around mid-October, so if you're interested in attending, let me or Jim Butcher know. Best, Dan Dan Bish bdanbish@gmail.com Building XS 914 Monowheel Tucson, Arizona USA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=505259#505259


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:40:43 AM PST US
    From: Robert Piskorski <rv9a2000@gmail.com>
    Subject: Re: Tucson Fly-In & Jack McKenzie's First Flight of N523WS
    Thank you for the invite and the video. It was a great pleasure to meet you all and it definitely inspired me on my refurbishing attempts. Since that weekend, I have done more work on my Europa in the last week then in the last year. Although, I have discovered more major new issues (major to me) that I did not plan for, I still feel confident that my Europa will be back in the air by Oct of next year. Regardless of my progress, I welcome and will attend any local events that may come up so I can keep my motivation going. And once my Europa is done, my plan is to attend more events that are not so local. Once again, thank you for all of your hospitality and great technical input. Hope to talk to and see you all soon again. Rob > On Dec 14, 2021, at 9:53 AM, danbish99 <bdanbish@gmail.com> wrote: > > > December 4th was the first flight of Jack McKenzie's awesome tri-gear, N523WS. The following day we gathered with two other Europas, Erich Trombley flew his monowheel from Las Vegas, NV and Mike Duane flew his conventional gear from Chandler, AZ, followed by a terrific dinner hosted by Jack & Alice McKenzie at their home in Green Valley, AZ just south of Tucson. > > I put together a video of the event you may have seen already on the Facebook page - you can view it here at https://youtu.be/OiWx4lo8EIs > > We plan to make this an annual event, probably sometime around mid-October, so if you're interested in attending, let me or Jim Butcher know. > > Best, > > Dan > > Dan Bish > bdanbish@gmail.com > Building XS 914 Monowheel > Tucson, Arizona USA > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=505259#505259 > > > > > > > > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:17:14 PM PST US
    From: MIKE CHRISTINE DUANE <duanefamly@aol.com>
    Subject: Re: Tucson Fly-In & Jack McKenzie's First Flight of N523WS
    Hey Rob, If youd like to get together, Id love to come over and see your build. Im pretty sure this Thursday is the only day I have anything planned. So just let me know and Ill work it in. Mike Duane Chandler, AZ Sent from my iPhone > On Dec 14, 2021, at 11:40 AM, Robert Piskorski <rv9a2000@gmail.com> wrote: > > > Thank you for the invite and the video. It was a great pleasure to meet you all and it definitely inspired me on my refurbishing attempts. Since that weekend, I have done more work on my Europa in the last week then in the last year. > Although, I have discovered more major new issues (major to me) that I did not plan for, I still feel confident that my Europa will be back in the air by Oct of next year. > > Regardless of my progress, I welcome and will attend any local events that may come up so I can keep my motivation going. And once my Europa is done, my plan is to attend more events that are not so local. > > Once again, thank you for all of your hospitality and great technical input. Hope to talk to and see you all soon again. > > Rob > >> On Dec 14, 2021, at 9:53 AM, danbish99 <bdanbish@gmail.com> wrote: >> >> >> December 4th was the first flight of Jack McKenzie's awesome tri-gear, N523WS. The following day we gathered with two other Europas, Erich Trombley flew his monowheel from Las Vegas, NV and Mike Duane flew his conventional gear from Chandler, AZ, followed by a terrific dinner hosted by Jack & Alice McKenzie at their home in Green Valley, AZ just south of Tucson. >> >> I put together a video of the event you may have seen already on the Facebook page - you can view it here at https://youtu.be/OiWx4lo8EIs >> >> We plan to make this an annual event, probably sometime around mid-October, so if you're interested in attending, let me or Jim Butcher know. >> >> Best, >> >> Dan >> >> Dan Bish >> bdanbish@gmail.com >> Building XS 914 Monowheel >> Tucson, Arizona USA >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=505259#505259 >> >> >> >> >> >> >> >> >> > > > > >


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:12:01 PM PST US
    Subject: Re: Tucson Fly-In & Jack McKenzie's First Flight of N523WS
    From: "Vlodek9" <rv9a2000@gmail.com>
    Hi Mike, Heck yeah!!! You and others are always welcome!! I'm available and at home till the 18th. Feel free to give me a call or txt at anytime and I'll send you the address. Looking forward to seeing you again. Thanks Rob 480-227-3011 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=505262#505262




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --