Today's Message Index:
----------------------
1. 02:17 AM - Re: The culprit (D McFadyean)
2. 03:13 AM - Re: The culprit (James)
3. 04:10 AM - Re: The culprit (William Daniell)
4. 04:26 AM - What did you do with your Europa this week 7/16 - 7/22 (h&jeuropa)
5. 07:09 AM - Re: The culprit (spcialeffects)
6. 11:24 AM - Re: The culprit (James)
7. 12:37 PM - Re: What did you do with your Europa this week 7/16 - 7/22 (n7188u)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
James,
What did you use to "weld" the tank?
Duncan McF.
> On 17 July 2022 at 14:56 James <james@kingdom.ie> wrote:
>
> Will, Xmas before last I had a leak which turned out to be a fuel hos
e that had been sawn through by the rudder cable. During the course of aski
ng for help here on the forum & before I found the cause, someone said that
their tank developed a crack & he cut an access opening on the top big eno
ugh to get 2 hands in, to weld the crack.
>
> Would this solution be easier for you, rather than removing the compl
ete tank?
>
> Cheers
> James
>
> Get Outlook for Android https://aka.ms/AAb9ysg
>
> ---------------------------------------------
> From: owner-europa-list-server@matronics.com <owner-europa-list-serve
r@matronics.com> on behalf of William Daniell <wdaniell.longport@gmail.com>
> Sent: Sunday, July 17, 2022 1:35:28 PM
> To: europa-list@matronics.com <europa-list@matronics.com>
> Subject: Re: Europa-List: The culprit
>
> Top "shelf" horizontal part....just to the right ot the reinforcement
which was stuck pretty hard.
>
> In other words exactly where youd expect stress.
>
> The tank material is in pretty good shape. However when i put in t
he tank many years ago i followed the manual. It is glued in very well....
.very well :-(
>
> William Daniell
> +1 786 878 0246
>
> On Sat, Jul 16, 2022, 23:48 Fred Klein <freddythek10@gmail.com mailto
:freddythek10@gmail.com > wrote:
>
mail.com mailto:freddythek10@gmail.com >
> >
> > WillCan you describe the location of the crack in the
tank?F.
> >
> >
> >
> > > On Jul 16, 2022, at 3:32 PM, William Daniell <wdaniell.longpo
rt@gmail.com mailto:wdaniell.longport@gmail.com > wrote:
> > >
> > >
> > >
> > > William Daniell
> > > +1 786 878 0246
> > > <PXL_20220716_164328200.jpg>
> >
> >
> > ==========
> > pa-List" rel="noreferrer noreferrer" target="_blank">http:/
/www.matronics.com/Navigator?Europa-List
> > ==========
> > FORUMS -
> > eferrer noreferrer" target="_blank">http://forums.matronics.c
om
> > ==========
> > WIKI -
> > errer noreferrer" target="_blank">http://wiki.matronics.com
> > ==========
> > b Site -
> > -Matt Dralle, List Admin.
> > ="noreferrer noreferrer" target="_blank">https://matronics.
com/contribution
> > ==========
> >
> >
> >
> >
> > >
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Duncan,
It wasn't me who had a cracked tank. I'll have to search through the forum
to find out who it was and get back to you.
James
Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
From: owner-europa-list-server@matronics.com <owner-europa-list-server@matr
onics.com> on behalf of D McFadyean <ami-mcfadyean@talktalk.net>
Sent: Monday, July 18, 2022 10:16:45 AM
Subject: Re: Europa-List: The culprit
James,
What did you use to "weld" the tank?
Duncan McF.
On 17 July 2022 at 14:56 James <james@kingdom.ie> wrote:
Will, Xmas before last I had a leak which turned out to be a fuel hose that
had been sawn through by the rudder cable. During the course of asking for
help here on the forum & before I found the cause, someone said that their
tank developed a crack & he cut an access opening on the top big enough to
get 2 hands in, to weld the crack.
Would this solution be easier for you, rather than removing the complete ta
nk?
Cheers
James
Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
From: owner-europa-list-server@matronics.com <owner-europa-list-server@matr
onics.com> on behalf of William Daniell <wdaniell.longport@gmail.com>
Sent: Sunday, July 17, 2022 1:35:28 PM
Subject: Re: Europa-List: The culprit
Top "shelf" horizontal part....just to the right ot the reinforcement which
was stuck pretty hard.
In other words exactly where youd expect stress.
The tank material is in pretty good shape. However when i put in the tan
k many years ago i followed the manual. It is glued in very well.....very
well :-(
William Daniell
+1 786 878 0246
On Sat, Jul 16, 2022, 23:48 Fred Klein <freddythek10@gmail.com<mailto:fredd
ythek10@gmail.com>> wrote:
o:freddythek10@gmail.com>>
Will=85Can you describe the location of the crack in the tank?=85F.
> On Jul 16, 2022, at 3:32 PM, William Daniell <wdaniell.longport@gmail.com
<mailto:wdaniell.longport@gmail.com>> wrote:
>
>
> William Daniell
> +1 786 878 0246
> <PXL_20220716_164328200.jpg>
pa-List" rel="noreferrer noreferrer" target="_blank">http://www.matroni
cs.com/Navigator?Europa-List
FORUMS -
eferrer noreferrer" target="_blank">http://forums.matronics.com
WIKI -
errer noreferrer" target="_blank">http://wiki.matronics.com
b Site -
-Matt Dralle, List Admin.
="noreferrer noreferrer" target="_blank">https://matronics.com/contribu
tion
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Everything now ripped out. What a job. So much for hdpe not sticking to
epoxy! The lay up delaminated rather than release the hdpe.
William Daniell
+1 786 878 0246
On Mon, Jul 18, 2022, 06:14 James <james@kingdom.ie> wrote:
> Duncan,
> It wasn't me who had a cracked tank. I'll have to search through the foru
m
> to find out who it was and get back to you.
>
> James
>
>
> Get Outlook for Android <https://aka.ms/AAb9ysg>
> ------------------------------
> *From:* owner-europa-list-server@matronics.com <
> owner-europa-list-server@matronics.com> on behalf of D McFadyean <
> ami-mcfadyean@talktalk.net>
> *Sent:* Monday, July 18, 2022 10:16:45 AM
> *To:* europa-list@matronics.com <europa-list@matronics.com>
> *Subject:* Re: Europa-List: The culprit
>
>
> James,
>
> What did you use to "weld" the tank?
>
>
> Duncan McF.
>
> On 17 July 2022 at 14:56 James <james@kingdom.ie> wrote:
>
> Will, Xmas before last I had a leak which turned out to be a fuel hose
> that had been sawn through by the rudder cable. During the course of aski
ng
> for help here on the forum & before I found the cause, someone said that
> their tank developed a crack & he cut an access opening on the top big
> enough to get 2 hands in, to weld the crack.
>
> Would this solution be easier for you, rather than removing the complete
> tank?
>
> Cheers
> James
>
> Get Outlook for Android <https://aka.ms/AAb9ysg>
> ------------------------------
> *From:* owner-europa-list-server@matronics.com <
> owner-europa-list-server@matronics.com> on behalf of William Daniell <
> wdaniell.longport@gmail.com>
> *Sent:* Sunday, July 17, 2022 1:35:28 PM
> *To:* europa-list@matronics.com <europa-list@matronics.com>
> *Subject:* Re: Europa-List: The culprit
>
> Top "shelf" horizontal part....just to the right ot the reinforcement
> which was stuck pretty hard.
>
> In other words exactly where youd expect stress.
>
> The tank material is in pretty good shape. However when i put in the
> tank many years ago i followed the manual. It is glued in very
> well.....very well :-(
>
> William Daniell
> +1 786 878 0246
>
> On Sat, Jul 16, 2022, 23:48 Fred Klein <freddythek10@gmail.com> wrote:
>
>
> WillCan you describe the location of the crack in the tank?
F.
>
>
> > On Jul 16, 2022, at 3:32 PM, William Daniell <
> wdaniell.longport@gmail.com> wrote:
> >
> >
> >
> > William Daniell
> > +1 786 878 0246
> > <PXL_20220716_164328200.jpg>
>
>
> ==========
> pa-List" rel="noreferrer noreferrer" target="_blank">
> http://www.matronics.com/Navigator?Europa-List
> ==========
> FORUMS -
> eferrer noreferrer" target="_blank">http://forums.matronics.com
> ==========
> WIKI -
> errer noreferrer" target="_blank">http://wiki.matronics.com
> ==========
> b Site -
> -Matt Dralle, List Admin.
> ="noreferrer noreferrer" target="_blank">
> https://matronics.com/contribution
> ==========
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | What did you do with your Europa this week 7/16 - 7/22 |
Starting the thread for this week a little late.
Jim
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=507505#507505
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
https://m.youtube.com/watch?v=VJf1a6RhKxc
Fuel tank repair
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=507506#507506
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|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 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: What did you do with your Europa this week 7/16 - 7/22 |
Weather sucked last weekend but got a couple local flights on both EU and LEZ.
Here are two pictures of EU taxiing and taking off by out local photographer Art
Rubin.
Chris
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=507509#507509
Attachments:
http://forums.matronics.com//files/eropa_taxing_432.jpg
http://forums.matronics.com//files/europa_takng_off_171.jpg
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|