Today's Message Index:
----------------------
1. 06:39 AM - Re: What did you do with your Europa this week - 18/11/22 (Area-51)
2. 08:23 AM - Re: Trutrak AP with Garmin GPS 18x 5Hz (Alan Burrill)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: What did you do with your Europa this week - 18/11/22 |
A very productive week now... finished off the doors on the 3D model; perfect glass
and perfect panel gaps in the perfect computer world.. gave the interior
some more detail.
Some cleanup tasks, a few amendments and it will be time give some time elsewhere
down at the tail.
Very happy with the results; time to put it in primer
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=508944#508944
Attachments:
http://forums.matronics.com//files/bfeb0d50_5544_4189_9830_5a28c78a5cd2_990.jpeg
http://forums.matronics.com//files/1c7d46ab_69d2_48f0_b7b4_ecfdede1a09c_125.jpeg
http://forums.matronics.com//files/f72d57cf_323c_4dac_8bec_aa6e5458a33c_213.jpeg
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Trutrak AP with Garmin GPS 18x 5Hz |
Ok Ive had a. Ha ce to fly mine with the GPS feed off.
As Duncan says below the display drops to show -||- but maintains the track last
set or you are holding when you switch it on.
The are no heading digits on the display so you will need use your compass/DI to
show that.
If you press the left or right buttons then you can alter the track the AP is
following either left or right and a number appears which if you press the button
you can increase or decrease after the AP locks on the numbers disappear and
you have the -||- on the display.
Useful if you have a GPS failure but wouldnt want that as normal mode of operation
so my suggestion is you need a GPS feed with the right NEMA message set to
get the most out of the AP and the ability for it to follow a track you have
programmed in is a bonus.
One word of caution, I have come across some GPS that dont put out any messages,
even the position message for driving a Transponder ADS-B output, unless there
is a track in the GPS. That was how some of the older version worked, GARMIN
430 and possible the early AVMAP were guilty of that.
Hope that helps.
Alan
Sent from my iPad
> On 10 Nov 2022, at 10:52, D McFadyean <ami-mcfadyean@talktalk.net> wrote:
>
>
> Digitrak only needs basic positional information from the GPS on a regular basis.
It will use this information to fly the track that has been set on the Digitrak.
> If a route is programmed in to the GPS, it will fly that too (with different
commands being set at the Digitrak control head to enable this), so long as the
GPS is also putting out the crosstrack error signal; not all of them do.
>
> Duncan McF.
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|