Today's Message Index:
----------------------
1. 03:51 AM - Coolant Hose (h&jeuropa)
2. 05:17 AM - Re: Coolant Hose (SPURPURA)
3. 05:51 AM - Re: Coolant Hose (rogersheridan@gmail.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
We are in the midst of the install of our replacement 914. Europa supplies a coolant
hose for the inlet to the coolant pump that has a 90 degree bend and a 180
degree bend in order to have the pump inlet facing to port.
But the inlet can be rotated to face starboard. Is there is reason not to use a
shorter, simpler hose that would just be a 90 degree bend to go to the coolant
radiator?
Jim & Heather
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=510622#510622
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Coolant Hose |
I had to replace the 180 degree hose to the radiator and did it with a 90 degree
silicone hose. I inserted a coil spring inside to keep it from collapsing and
has worked well for 4 years now. You can find the spring at McMaster Carr and
it works great for tight bends on silicone hoses.
--------
N951EU - Tri-gear & 912ULS, N77EU- Mono & 914
I'D RATHER HAVE A BOTTLE IN FRONT OF ME THAN A FRONTAL LABOTAMY.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=510623#510623
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Coolant Hose |
Hi Jim,
I think the pipe will have to bend in order to avoid the ring mount.
Sounds worth a try.
Regards,
Roger
> On 15 Apr 2023, at 11:53, h&jeuropa <butcher43@att.net> wrote:
>
>
> We are in the midst of the install of our replacement 914. Europa supplies a
coolant hose for the inlet to the coolant pump that has a 90 degree bend and a
180 degree bend in order to have the pump inlet facing to port.
>
> But the inlet can be rotated to face starboard. Is there is reason not to use
a shorter, simpler hose that would just be a 90 degree bend to go to the coolant
radiator?
>
> Jim & Heather
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=510622#510622
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|