Europa-List Digest Archive

Wed 05/17/23


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 01:14 AM - Re: Door latch shoot-bolt stop (JonathanMilbank)
     2. 01:31 AM - Re: Door latch shoot-bolt stop (Mike)
     3. 04:13 AM - Re: Door latch shoot-bolt stop (Alan Burrill)
     4. 04:39 AM - Re: Door latch shoot-bolt stop (Mike)
     5. 06:59 AM - Fw: Door latch shoot-bolt stop (Lyle Antieau)
 
 
 


Message 1



  • 					INDEX
    		•  Back to Main INDEX
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 01:14:54 AM PST US
    Subject: Re: Door latch shoot-bolt stop
    From: "JonathanMilbank" <jdmilbank@yahoo.co.uk>
          
      
      Thanks to those who responded.
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=510813#510813
      
      


    Message 2

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 01:31:50 AM PST US
    From: "Mike" <mike@nyumba.co.uk>
    Subject: Door latch shoot-bolt stop
          
      If anyone gets to print these shoot bolt stops in the UK, could I 
      purchase a couple of sets please?
      
      Thanks
      
      
      From: owner-europa-list-server@matronics.com 
      [mailto:owner-europa-list-server@matronics.com] On Behalf Of Alan 
      Burrill
      Sent: 16 May 2023 07:53
      Subject: Re: Europa-List: Door latch shoot-bolt stop
      
      
       <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops> 
      Shoot bolt stops
      
       <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops> 
      theeuropaclub.org
      
       <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops> 
      apple-icon-180x180.png
      
      
      Sent from my iPad
      
      
      On 16 May 2023, at 02:25, JonathanMilbank <jdmilbank@yahoo.co.uk> wrote:
      
      <jdmilbank@yahoo.co.uk>
      
      Please would someone let me know, or send me the file, which would 
      enable the 3D printing of a shoot-bolt stop. Mine has inevitably become 
      damaged by the extended shoot-bolt, when a gust of wind caused the 
      canopy door to slam down.
      
      So far I've been unable to find the file either on the LAA or Europa 
      Club websites.
      
      Many thanks.
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=510803#510803
      
      


    Message 3

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 04:13:30 AM PST US
    From: Alan Burrill <alanb@dpy01.co.uk>
    Subject: Re: Door latch shoot-bolt stop
          
      Someone on the WatsApp group were offering to do just that. I suggest a 
      message on that group might get a response or even a link to a printing 
      company that will do them.
      
      You could always whittle down some hardwood :-)
      
      Alan
      
      > On 17 May 2023, at 09:31, Mike <mike@nyumba.co.uk> wrote:
      > 
      > If anyone gets to print these shoot bolt stops in the UK, could I 
      purchase a couple of sets please?
      > Thanks
      >  
      > From: owner-europa-list-server@matronics.com 
      <mailto:owner-europa-list-server@matronics.com> 
      [mailto:owner-europa-list-server@matronics.com] On Behalf Of Alan 
      Burrill
      > Sent: 16 May 2023 07:53
      > To: europa-list@matronics.com <mailto:europa-list@matronics.com>
      > Subject: Re: Europa-List: Door latch shoot-bolt stop
      >  
      > Shoot bolt stops 
      <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops>
      > theeuropaclub.org 
      <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops>
      > <image001.png> 
      <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops>
      >  
      > 
      > Sent from my iPad
      > 
      > 
      > On 16 May 2023, at 02:25, JonathanMilbank <jdmilbank@yahoo.co.uk> 
      wrote:
      > 
      <jdmilbank@yahoo.co.uk>
      >> 
      >> Please would someone let me know, or send me the file, which would 
      enable the 3D printing of a shoot-bolt stop. Mine has inevitably become 
      damaged by the extended shoot-bolt, when a gust of wind caused the 
      canopy door to slam down.
      >> 
      >> So far I've been unable to find the file either on the LAA or Europa 
      Club websites.
      >> 
      >> Many thanks.
      >> 
      >> 
      >> 
      >> 
      >> Read this topic online here:
      >> 
      >> http://forums.matronics.com/viewtopic.php?p=510803#510803
      >> 
      
      


    Message 4

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 04:39:52 AM PST US
    From: "Mike" <mike@nyumba.co.uk>
    Subject: Door latch shoot-bolt stop
          
      I did whittle some, but they were short of being skilful. J
      
      I will try the group.
      
      
      From: owner-europa-list-server@matronics.com 
      [mailto:owner-europa-list-server@matronics.com] On Behalf Of Alan 
      Burrill
      Sent: 17 May 2023 12:13
      Subject: Re: Europa-List: Door latch shoot-bolt stop
      
      
      Someone on the WatsApp group were offering to do just that. I suggest a 
      message on that group might get a response or even a link to a printing 
      company that will do them.
      
      
      You could always whittle down some hardwood :-)
      
      
      Alan
      
      
      On 17 May 2023, at 09:31, Mike <mike@nyumba.co.uk> wrote:
      
      
      If anyone gets to print these shoot bolt stops in the UK, could I 
      purchase a couple of sets please?
      
      Thanks
      
      
      From:  <mailto:owner-europa-list-server@matronics.com> 
      owner-europa-list-server@matronics.com [ 
      <mailto:owner-europa-list-server@matronics.com> 
      mailto:owner-europa-list-server@matronics.com] On Behalf Of Alan Burrill
      Sent: 16 May 2023 07:53
      Subject: Re: Europa-List: Door latch shoot-bolt stop
      
      
       <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops> 
      Shoot bolt stops
      
       <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops> 
      theeuropaclub.org
      
       <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops> 
      <image001.png>
      
      
      Sent from my iPad
      
      
      On 16 May 2023, at 02:25, JonathanMilbank <jdmilbank@yahoo.co.uk> wrote:
      
      <jdmilbank@yahoo.co.uk>
      
      Please would someone let me know, or send me the file, which would 
      enable the 3D printing of a shoot-bolt stop. Mine has inevitably become 
      damaged by the extended shoot-bolt, when a gust of wind caused the 
      canopy door to slam down.
      
      So far I've been unable to find the file either on the LAA or Europa 
      Club websites.
      
      Many thanks.
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=510803#510803
      
      


    Message 5

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 06:59:09 AM PST US
    From: Lyle Antieau <europa@antieau.org>
    Subject: Door latch shoot-bolt stop
          
      Here's what you're looking for:
      
      https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops
      
      ---------- Forwarded message ---------
      From: Alan Burrill <alanb@dpy01.co.uk>
      Subject: Re: Europa-List: Door latch shoot-bolt stop
      
      
      Someone on the WatsApp group were offering to do just that. I suggest a
      message on that group might get a response or even a link to a printing
      company that will do them.
      
      You could always whittle down some hardwood :-)
      
      Alan
      
      On 17 May 2023, at 09:31, Mike <mike@nyumba.co.uk> wrote:
      
      If anyone gets to print these shoot bolt stops in the UK, could I purchase
      a couple of sets please?
      Thanks
      
      *From:* owner-europa-list-server@matronics.com [
      mailto:owner-europa-list-server@matronics.com
      <owner-europa-list-server@matronics.com>] *On Behalf Of *Alan Burrill
      *Sent:* 16 May 2023 07:53
      *To:* europa-list@matronics.com
      *Subject:* Re: Europa-List: Door latch shoot-bolt stop
      
      Shoot bolt stops
      <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops>
      theeuropaclub.org
      <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops>
      <image001.png>
      <https://www.theeuropaclub.org/building/stl-files/shoot-bolt-stops>
      
      
      Sent from my iPad
      
      
      On 16 May 2023, at 02:25, JonathanMilbank <jdmilbank@yahoo.co.uk> wrote:
      
      hoo.co.uk
      >
      
      Please would someone let me know, or send me the file, which would enable
      the 3D printing of a shoot-bolt stop. Mine has inevitably become damaged by
      the extended shoot-bolt, when a gust of wind caused the canopy door to slam
      down.
      
      So far I've been unable to find the file either on the LAA or Europa Club
      websites.
      
      Many thanks.
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=510803#510803
      

    

    


    

    

    

    

    Other Matronics Email List Services
    

    

    

    


  • Post A New Message
    		•   europa-list@matronics.com
    

  • UN/SUBSCRIBE
    		•   http://www.matronics.com/subscription
    

  • List FAQ
    		•   http://www.matronics.com/FAQ/Europa-List.htm
    

  • Web Forum Interface To Lists
    		•   http://forums.matronics.com
    

  • Matronics List Wiki
    		•   http://wiki.matronics.com
    

  • 7-Day List Browse
    		•   http://www.matronics.com/browse/europa-list
    

  • Browse Europa-List Digests
    		•   http://www.matronics.com/digest/europa-list
    

  • Browse Other Lists
    		•   http://www.matronics.com/browse
    

  • Live Online Chat!
    		•   http://www.matronics.com/chat
    

  • Archive Downloading
    		•   http://www.matronics.com/archives
    

  • Photo Share
    		•   http://www.matronics.com/photoshare
    

  • Other Email Lists
    		•   http://www.matronics.com/emaillists
    

  • Contributions
    		•   http://www.matronics.com/contribution
    



    

    


    

    


    
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.


    

    

-- Please support this service by making your Contribution today! --