---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Wed 12/27/23: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:39 AM - Re: Re: 181 Receives Planned Upgrades (Pete) 2. 11:18 AM - Re: 181 Receives Planned Upgrades (phillik747) ________________________________ Message 1 _____________________________________ Time: 01:39:52 AM PST US From: Pete Subject: Re: Europa-List: Re: 181 Receives Planned Upgrades Xcept he didnt tell them it was inside the fuse ;) > On Dec 26, 2023, at 9:58PM, Area-51 wrote: > > > Nice... its good to be a test pig sometimes; access to special developer features! > > I didn't like the TBX anywhere on the europa's rudder. I tried it on the horizontal stab also and didn't like it there either due to the need to cable all the down to that position. Thought about laying it with the dipole on the horizontal but was informed by supplier it needs to be vertical orientated with gps chip facing upwards due to moisture drain hole position. Supplier also suggested it go inside the fuselage, but again I wanted to utilise the position light feature. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=512955#512955 > > > > > > > > > ________________________________ Message 2 _____________________________________ Time: 11:18:32 AM PST US Subject: Europa-List: Re: 181 Receives Planned Upgrades From: "phillik747" That is nice setup! Are you willing to share those 3d files? I have been on the fence with and av-30 setup, but it seems you have to be in the ecosystem for a working ads-b solution. Your setup is impressive. My main holdup on an AV-30 solution is working with what I already have. I wrote my own altitude encoder software that listens to pressure altitude given over wifi in NMEA format. It then relays that in ICARUS format over RS232. I have been wondering if I can utilize the signal coming from the AV-30 (using their AV-Link) and convert it. Or connect to it over rs232 to capture the data. That way I can use the AV-30 to update the pressure altitude on the GTX-327, via my script, and use the EchoUAT for ADS-B out/in. This is all hypothetical since I dont have an AV-30 to test with. My script is on github: https://github.com/icarus747/PicoICARUS /Kyle -------- Kyle Europa Tri-gear (under construction) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=512962#512962 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.