Today's Message Index:
----------------------
1. 07:26 AM - Re: PV-50 Prop settings (Paul Hawkins)
2. 07:27 AM - Re: Recommendations VP Prop (Paul Hawkins)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: PV-50 Prop settings |
Hi
Many thanks for your responses and recommendations for a replacement prop m
uch appreciated and a special thanks to Bob, when he posts it always remind
s me every day is a school day.
cheers Paul
________________________________
From: Paul Hawkins
Sent: 24 March 2022 15:00
Subject: PV-50 Prop settings
Hi
Some advice please on prop settings, my Europa has a 914 engine with an Arp
last PV-50 prop in fine pitch it=92s set to give just under 5400 rpm static
and on take-off works as it should the problem is when I set to cruise I a
im for 130 Kts but I have to keep coming back on the throttle not to go abo
ve that speed I end up with 130 Kts with an rpm of 4200 the problem started
after a prop service, normally I tend to cruise at 125/130 for 4650/4700 r
pm-ish, there=92s 10=B0 difference between fine and coarse pitch, which way
should I adjust + or ' the 10=B0 prop difference?
Cheers Paul
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Recommendations VP Prop |
Hi chaps
Many thanks for your responses and recommendations for a replacement prop m
uch appreciated and a special thanks to Bob, when he posts always reminds m
e every day is a school day.
cheers Paul
________________________________
From: Paul Hawkins <pwhawkinsbuilders@hotmail.com>
Sent: 27 October 2024 10:28
Subject: Recommendations VP Prop
Hi chaps
I=92m looking for recommendations for a VP prop for my trike XS Europa, I n
eed help on this one I would appreciate your response.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|