Europa-List Digest Archive

Wed 11/13/24


Total Messages Posted: 8



Today's Message Index:
----------------------
 
     0. 12:06 PM - Coming Soon - The List of Contributors - Please Make A Contribution Today! (Matt Dralle)
     1. 03:02 AM - Re: Re: Europa-List Digest: 1 Msgs - 10/22/24 (Ken Atkinson)
     2. 09:35 AM - Re: Re: Rotax 912ULS oil consumption (Christoph Both)
     3. 11:24 AM - Re: What's Your Contribution Used For? (Raimo Toivio)
     4. 02:25 PM - Tail plane questions  (Alex Kaarsberg)
     5. 05:57 PM - Re: Tail plane questions (William Daniell)
     6. 06:07 PM - Re: Tail plane questions (Al)
     7. 11:27 PM - Re: Tail plane questions  (Alan Burrill)
 
 
 


Message 0


  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:06:32 PM PST US
    From: Matt Dralle <dralle@matronics.com>
    Subject: Coming Soon - The List of Contributors - Please Make A Contribution
    Today! Each year at the end of the List Fund Raiser, I post a message acknowledging everyone that so generously made a Contribution to support the Lists. Its my way of publicly thanking everyone that took a minute to show their appreciation for the Lists. Please take a moment and assure that your name is on that List of Contributors (LOC)! As a number of members have pointed out over the years, the List seems at least as valuable a building / entertainment tool as your typical magazine subscription! Assure that your name is on this year's LOC! Show others that you appreciate the Lists. Making a Contribution to support the Lists is fast and easy using your Credit card or Paypal on the Secure Web Site: https://matronics.com/contribution or by dropping a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 I would like to thank everyone that has so generously made a Contribution thus far in this year's List Fund Raiser! Remember that its YOUR support that keeps these Lists going and improving! Don't forget to include a little comment about how the Lists have helped you! Best regards, Matt Dralle Matronics Email List Administrator RV-4/RV-6/RV-8 Builder/Rebuilder/Pilot


    Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:02:01 AM PST US
    Subject: Re: Europa-List Digest: 1 Msgs - 10/22/24
    From: Ken Atkinson <kennethatkinson178@btinternet.com>
    I have used WDS Components for Allen bolts etc.. They will even provide a certificate of conformity for a price? not neccessary! Cheers Ken. On 23/10/2024 09:23, John Archer wrote: > This propeller is offered for sale on a WhatsApp group: > Matt Dovey +44 7872 000882 > > >> On 23 Oct 2024, at 08:33, Europa-List Digest Server <europa-list@matronics.com> wrote: >> >> * >> >> ================================================= >> Online Versions of Today's List Digest Archive >> ================================================= >> >> Today's complete Europa-List Digest can also be found in either of the >> two Web Links listed below. The .html file includes the Digest formatted >> in HTML for viewing with a web browser and features Hyperlinked Indexes >> and Message Navigation. The .txt file includes the plain ASCII version >> of the Europa-List Digest and can be viewed with a generic text editor >> such as Notepad or with a web browser. >> >> HTML Version: >> >> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 24-10-22&Archive=Europa >> >> Text Version: >> >> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 24-10-22&Archive=Europa >> >> >> =============================================== >> EMail Version of Today's List Digest Archive >> =============================================== >> >> >> ---------------------------------------------------------- >> Europa-List Digest Archive >> --- >> Total Messages Posted Tue 10/22/24: 1 >> ---------------------------------------------------------- >> >> >> Today's Message Index: >> ---------------------- >> >> 1. 04:08 PM - 914 turbo Arplast prop (russ.dennis@sky.com) >> >> >> >> ________________________________ Message 1 _____________________________________ >> >> >> Time: 04:08:59 PM PST US >> From: russ.dennis@sky.com >> Subject: Europa-List: 914 turbo Arplast prop >> >> Hi , >> >> A friend of mine has an 914 turbo with an Arplast prop that has been damage >> d >> beyond repair. Can anyone suggest a readily available replacement ? >> >> Regards >> Russ Dennis >> >> >> > =================================== > =================================== > =================================== > =================================== > =================================== >> >> >> -- This email has been checked for viruses by AVG antivirus software. www.avg.com


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:35:37 AM PST US
    From: Christoph Both <christoph.both@acadiau.ca>
    Subject: Re: Rotax 912ULS oil consumption
    SGVsbG8gRXVyb3BhIEdyb3VwLA0KDQpJIGFtIHJlYWNoaW5nIG91dCB0byBzZWUgaWYgYSBncm91 cCBtZW1iZXIgaGFzIGF2YWlsYWJsZSwgYXMgYSBzcGFyZSBwYXJ0LCB0aGUgcmlnaHQgZnJvbnQg c2lkZSBoZWFkZXIgZXhoYXVzdCB0dWJlIGFzc2VtYmx5IChDeWxpbmRlciAjMSk/DQoNCkEgZmV3 IGRheXMgYmFjaywgSSBkaXNjb3ZlcmVkIHRoYXQgaXQgc2hlYXJlZCByaWdodCB0aHJvdWdoIGF0 IHRoZSBtb3VudGluZyBjbGFtcCwgYWZ0ZXIgSSBzbWVsbGVkIHNvbWUgZXhoYXVzdCBmdW1lcy4g R2xhZCBJIGNoZWNrZWQgcmlnaHQgYXdheS4gVGhlIGVudGlyZSBhc3NlbWJseSwgdGhvdWdoLCBz dGlsbCBoZWxkIHRoZSBicm9rZW4gZXhoYXVzdCBwaXBlIHBlcmZlY3RseSBpbiBwb3NpdGlvbiwg cHJldmVudGluZyBtb3N0IG9mIHRoZSBob3QgZ2FzZXMgaGl0dGluZyB0aGUgbmVhcmJ5IGNsYXNz aWMgcmlnaHQgcmFkaWF0b3IuIEx1Y2t5Lg0KDQpOb3cgSSB0cnkgdG8gZ2V0IGx1Y2t5IGZpbmRp bmcgc29tZW9uZSB3aG8gbWlnaHQgaGF2ZSB0aGlzIHBhcnQgYW5kIHdpbGxpbmcgdG8gcGFydCB3 aXRoIGl0LiBJIGFtIGFsc28gY29uc2lkZXJpbmcgYnV5aW5nIHRoZSBlbnRpcmUgZG91YmxlIHNp bGVuY2VyIGV4aGF1c3QgaWYgaW4gbmV3LCBub3QgeWV0IGluc3RhbGxlZCBjb25kaXRpb24uDQoN CkFueSBsZWFkcz8gU3VnZ2VzdGlvbnM/IFJlcGFpcmFibGU/IFdlbGRhYmxlPw0KDQpUaGFuayB5 b3UgdmVyeSBtdWNoLA0KDQpDaHJpc3RvcGggQm90aA0KRXVyb3BhIENsYXNzaWMgIzIyMw0KV29s ZnZpbGxlLCBOb3ZhIFNjb3RpYSwgQ2FuYWRhDQoNCg0KDQo


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:24:15 AM PST US
    Subject: Re: What's Your Contribution Used For?
    From: Raimo Toivio <raimo.toivio@rwm.fi>
    Trevor, it must be very bad if you are not able to sent even 20 to Matt...just drink few beers less. allekirjoitus2 Cheers, Raimo Toivio signature "Perfection has been achieved not when there is nothing left to add, but when there is nothing left to take away" - Antoine de Saint-Exupry Europa XS Monowheel OH-XRT #417 2007 Antonov AN-2 TDSRM AirCamper HA-MDO 1987 EFAT Arola Manor 37800 Akaa FINLAND tel +358 3 3753 777 mob +358 40 590 1450 www.rwm.fi <http://www.rwm.fi/> raimo.toivio@rwm.fi . kirjoitti 11.11.2024 klo 21.55: > > Hello Matt, > > We normally contribute but as our revenue was decimated by lockdowns and created debt we did not have, the interest rate has doubled and bookings have thinned-out significantly, we are looking to borrow money for cashflow. We will be unable to contribute anything this year - apologies. Let's hope as the economy gets better, we can also do better next year. > > Regards > Trevor > > On 12/11/24, 8:50 AM, "Matt Dralle"<owner-europa-list-server@matronics.com on behalf of dralle@matronics.com> wrote: > > > Dear Listers, > > You might have wondered at some point, "What's my Contribution used for?" Here are just a few examples of what your direct List support enables... It provides for the expensive, commercial-grade Internet connection used on the List. It pays for the regular system hardware and software upgrades enabling the highest performance possible for List services such as the Archive Search Engine, List Browser, and the Web Forums. It pays for the over 27 years of on-line archive data always available for instant search and access. And, it offsets the many hours spent writing, developing, and maintaining the custom applications that power these List Service such as the List Browse, Search Engine, Forums, and Wiki. > > But most importantly, your List Contribution enables a forum where you and your peers can communicate freely in an environment that is free from moderation, censorship, advertising, commercialism, SPAM, and computer viruses. > > It is YOUR CONTRIBUTION that directly enables all these aspects of Matronics List services. Please support it today with your List Contribution. Its one of the best investments you can make in your Sport! > > List Contribution Web Site: > > https://matronics.com/contribution > > or, you can send a personal check to the following address: > > Matronics / Matt Dralle > 581 Jeannie Way > Livermore, CA 94550 > > Thank you for your support! > > Matt Dralle > Email List Administrator > RV-4/RV-6/RV-8 Builder/Rebuilder/Pilot > >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:25:58 PM PST US
    From: Alex Kaarsberg <alex@kaarsberg.org>
    Subject: Tail plane questions
    Hello all, in the absence of the factory for parts, a kit that has been waiting to be finished for a few decades and now is in progress again, the stabilator axis has been found to have one end about 8mm higher than the other. If the plastic bush needs replacing after the removal, can anyone help with material spec and dimensions to make up a new one? Also, the modification to strengthen the counterweight installation was deemed necessary due to a bent arm, I gather. Has it been considered if cushioning of the mass before end of travel could achieve what the beefing up of the arm sought to do? Best regards, Alex Kaarsberg, kit 529


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:57:12 PM PST US
    From: William Daniell <wdaniell.longport@gmail.com>
    Subject: Re: Tail plane questions
    Alex For what it's worth my tailplane has one side higher than the other and it flies fine. The stab arm is sort of cushioned at the bottom. I put a stop on the top of the ply containment thing to stop the weight hitting the fuselage top. The plastic rings look like hdpe but i don't know for sure. Will William Daniell +1 786 878 0246 On Wed, Nov 13, 2024, 17:27 Alex Kaarsberg <alex@kaarsberg.org> wrote: > > Hello all, in the absence of the factory for parts, a kit that has been > waiting to be finished for a few decades and now is in progress again, the > stabilator axis has been found to have one end about 8mm higher than the > other. > If the plastic bush needs replacing after the removal, can anyone help > with material spec and dimensions to make up a new one? > > Also, the modification to strengthen the counterweight installation was > deemed necessary due to a bent arm, I gather. > Has it been considered if cushioning of the mass before end of travel > could achieve what the beefing up of the arm sought to do? > > Best regards, > Alex Kaarsberg, kit 529 > >


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:07:14 PM PST US
    Subject: Re: Tail plane questions
    From: Al <barp99@gmail.com>
    Alex, My bushes are yet to be fitted, so could measure them up for you if needed, I'm away from it for a couple of weeks but after that will have access. Brian Phillips Aus. On 14/11/2024 9:25 am, Alex Kaarsberg wrote: > > Hello all, in the absence of the factory for parts, a kit that has been waiting to be finished for a few decades and now is in progress again, the stabilator axis has been found to have one end about 8mm higher than the other. > If the plastic bush needs replacing after the removal, can anyone help with material spec and dimensions to make up a new one? > > Also, the modification to strengthen the counterweight installation was deemed necessary due to a bent arm, I gather. > Has it been considered if cushioning of the mass before end of travel could achieve what the beefing up of the arm sought to do? > > Best regards, > Alex Kaarsberg, kit 529 > >


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:27:18 PM PST US
    From: Alan Burrill <alanb@dpy01.co.uk>
    Subject: Re: Tail plane questions
    --- MIME Errors - No Plain-Text Section Found --- A message with no text/plain MIME section was received. The entire body of the message was removed. Please resend the email using Plain Text formatting. HOTMAIL is notorious for only including an HTML section in their client's default configuration. If you're using HOTMAIL, please see your email application's settings and switch to a default mail option that uses "Plain Text". --- MIME Errors No Plain-Text Section Found ---




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --