---------------------------------------------------------- Falco-List Digest Archive --- Total Messages Posted Thu 07/19/07: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:55 AM - Falco Electrics (ROGER & JEAN CURTIS) 2. 12:04 PM - Re: Falco Electrics (Jeff Rosson) 3. 03:08 PM - Re: Falco Electrics (Bob McCallum) 4. 03:45 PM - Re: Falco Electrics (ROGER & JEAN CURTIS) ________________________________ Message 1 _____________________________________ Time: 11:55:12 AM PST US From: "ROGER & JEAN CURTIS" Subject: Falco-List: Falco Electrics I am doing a plans built Falco. Since Sequoia did not see fit to include any info on the electrical plans, I am doing the design and layout myself. I am looking for any info that I can obtain on how other builders have run things such as main power and ground, bus layout and connection and the like. Also, info on where wire bundles run and any kinds of problems encountered, and resolution, for such things as radio noise, would also be greatly appreciated. If you have pictures or illistrations available this would be an added bonus. Thanks, Roger Curtis ________________________________ Message 2 _____________________________________ Time: 12:04:34 PM PST US Subject: Falco-List: Re: Falco Electrics From: "Jeff Rosson" I thought that Sequoia sold some very detailed electrical drawings seperately. You might call them up. Jeff Read this topic online here: http://forums.matronics.com/viewtopic.php?p=124808#124808 ________________________________ Message 3 _____________________________________ Time: 03:08:01 PM PST US From: "Bob McCallum" Subject: Re: Falco-List: Falco Electrics Roger; You can't do better for Buss layout, electrical design and help, than joining the AeroElectric list also on the Matronics site. If you follow the AeroElectric advice, procedures and architectures radio noise doesn't exist and so is a non-issue. Buss architecture is one the lists many strong points, but it does differ from the Alfred's approach. As for specific routings in the F8L I'm not that far along yet and so can't help there, but hopefully some of the others can assist in that regard. Falco # 908 Bob McC ----- Original Message ----- From: ROGER & JEAN CURTIS To: falco-list@matronics.com Sent: Thursday, July 19, 2007 2:54 PM Subject: Falco-List: Falco Electrics I am doing a plans built Falco. Since Sequoia did not see fit to include any info on the electrical plans, I am doing the design and layout myself. I am looking for any info that I can obtain on how other builders have run things such as main power and ground, bus layout and connection and the like. Also, info on where wire bundles run and any kinds of problems encountered, and resolution, for such things as radio noise, would also be greatly appreciated. If you have pictures or illistrations available this would be an added bonus. Thanks, Roger Curtis ________________________________ Message 4 _____________________________________ Time: 03:45:44 PM PST US From: "ROGER & JEAN CURTIS" Subject: Re: Falco-List: Falco Electrics Bob, Thanks for the reply. I must agree. I have been reading many of the articles by Bob Nuckolls of AeroElectric, and he has a lot of great info. I do expect to take one or several of his electrical drawings and modify to fit my application. I am interested in seeing what other Falco builders are doing. Roger ----- Original Message ----- From: Bob McCallum To: falco-list@matronics.com Sent: Thursday, July 19, 2007 6:06 PM Subject: Re: Falco-List: Falco Electrics Roger; You can't do better for Buss layout, electrical design and help, than joining the AeroElectric list also on the Matronics site. If you follow the AeroElectric advice, procedures and architectures radio noise doesn't exist and so is a non-issue. Buss architecture is one the lists many strong points, but it does differ from the Alfred's approach. As for specific routings in the F8L I'm not that far along yet and so can't help there, but hopefully some of the others can assist in that regard. Falco # 908 Bob McC ----- Original Message ----- From: ROGER & JEAN CURTIS To: falco-list@matronics.com Sent: Thursday, July 19, 2007 2:54 PM Subject: Falco-List: Falco Electrics I am doing a plans built Falco. Since Sequoia did not see fit to include any info on the electrical plans, I am doing the design and layout myself. I am looking for any info that I can obtain on how other builders have run things such as main power and ground, bus layout and connection and the like. Also, info on where wire bundles run and any kinds of problems encountered, and resolution, for such things as radio noise, would also be greatly appreciated. If you have pictures or illistrations available this would be an added bonus. Thanks, Roger Curtis href="http://www.matronics.com/Navigator?Falco-List">http://www.matroni cs.com/Navigator?Falco-List href="http://forums.matronics.com">http://forums.matronics.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message falco-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Falco-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/falco-list Browse Digests http://www.matronics.com/digest/falco-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.