Today's Message Index:
----------------------
1. 04:42 PM - Re: (no subject) (LRE2@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: (no subject) |
--> FEWMustang-List message posted by: LRE2@aol.com
Ken G.
I don't know if I will help you clear up or muddy up the issue. I
found that when my gear retracted under hydraulic pressures of 1000-1100 psi, it
hit the uplocks pretty hard. So I made some calculations, and put in the
spacers, as directed. I made mine 0.090 alum. The gear sounds better, doesn't
hit as hard. I have the feeling that each installation is going to be
different, based on small differences in dimensions. It's easier to put the spacers
in
before you put everything together and hook up the pump. But you'll never
know for sure if you really needed them. LRE
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|