----------------------------------------------------------
                           FEWMustang-List Digest Archive
                                      ---
                     Total Messages Posted Sun 10/24/04: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:42 PM - Re: (no subject)  (LRE2@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:42:49 PM PST US
From: LRE2@aol.com
Subject: Re: FEWMustang-List: (no subject)

--> FEWMustang-List message posted by: LRE2@aol.com

Ken G.
       I don't know if I will help you clear up or muddy up the issue.  I 
found that when my gear retracted under hydraulic pressures of 1000-1100 psi, it

hit the uplocks pretty hard.  So I made some calculations, and put in the 
spacers, as directed.  I made mine 0.090 alum.  The gear sounds better, doesn't

hit as hard.  I have the feeling that each installation is going to be 
different, based on small differences in dimensions. It's easier to put the spacers
in 
before you put everything together and hook up the pump.  But you'll never 
know for sure if you  really needed them.  LRE