---------------------------------------------------------- FEWMustang-List Digest Archive --- Total Messages Posted Sun 05/15/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:34 AM - Tool (Tore S. Bristol) 2. 07:31 PM - Re: Tool (Cliff Hoyle) ________________________________ Message 1 _____________________________________ Time: 04:34:24 AM PST US From: "Tore S. Bristol" Subject: FEWMustang-List: Tool --> FEWMustang-List message posted by: "Tore S. Bristol" Hello FEW Mustang builders. I am about to make a tool described in Dennis Turners Mustang Express Vol 2, Oct 1998. It is designed by Conrad Boulton. Has anybody else made it, and how well does it performe? I have to admit I have problem visualizing how to use it, and therefore to set the dimentions. Regards Tore S Bristol ________________________________ Message 2 _____________________________________ Time: 07:31:57 PM PST US From: "Cliff Hoyle" Subject: Re: FEWMustang-List: Tool --> FEWMustang-List message posted by: "Cliff Hoyle" Tore, I made the tool and tried to use it and didn't find it helpful and instead somewhat awkward. Maybe someone else had better luck. I did much better using flat nylon body putty tools used by auto repair mechanics to spead Bondo type body repair putty. Cliff ----- Original Message ----- From: "Tore S. Bristol" Subject: FEWMustang-List: Tool > --> FEWMustang-List message posted by: "Tore S. Bristol" > > Hello FEW Mustang builders. > I am about to make a tool described in Dennis Turners Mustang Express > Vol 2, Oct 1998. > It is designed by Conrad Boulton. > Has anybody else made it, and how well does it performe? > I have to admit I have problem visualizing how to use it, and therefore to > set the dimentions. > Regards > Tore S Bristol > > >