Today's Message Index:
----------------------
1. 03:40 PM - Re: 8 bolt flange (Tore S. Bristol)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 8 bolt flange |
Hi Ed ,
hope you have a good holiday season so far .
If you have been reading your E-mail you should know that I told you "
NOT TO SHIP ANYTHING " if you had not by Nov 12 th !
You still went ahead and shipped ( hoses ?) on Nov 26th ! , and of
course it would come back to you , as I was not here !
There is something else I do not understand ;
You told me in Jan 4 YEARS AGO , you could make an 8 bolt falange for my
MT prop .
And countless times in the last 4 years you have told me it would be
ready
" next " week .
Then on Oct 1st this year ; Will ship reservoir , plumbing , filter AND
8 BOLT FLANGE this week .
So how come you you all of a sudden dont have the flange , and dont even
know which one I need ?
I also told you again a few days ago that I have an 8 bolt MT prop with
the bolts fixed to the hub , as opposed to loose bolts .
You know ; I just think you are still stalling and wasting my time as
you have been for the last 4 1/2 years .
I also told you that the 6 bolt mock up flange you promised more than 2
1/2 years ago,
and shipped 2 weeks ago was of very little use to me as it is for loose
bolts and have treaded inserts for loose bolts ( and the inserts
protrude so it has a different thicness )
I also asked for dokumentation on the PSRU , I have no indication that
it has been tested or run at all .
Again; if I do not have a timetable for delivery of the remaining parts
( and I excpect max 2 weeks ) by Jan 4th I will contact The Ventura DAs
office .
I have all the forms filled out and copies of relevant documents ready .
Do yourself a favour , and dont waste your time on delaying tactics !
I am really fed up with your way of " conducting business " and so it
seems are a lot of others .=B4
Tore
----- Original Message -----
From: Ed Hullinger
To: Tore S. Bristol
Sent: Wednesday, December 26, 2007 7:55 PM
Subject: 8 bolt flange
Hi Tore.
Hope you are having a good holiday season thus far.
I noticed that the package I shipped that contained the plumbing hoses
and fitting for the PSRU was returned. Now that you have the reservoir,
would you like me to reship the plumbing?
My local MT representative is confirming the specifications for the
ARP880 flange. The standard 8 bolt prop hub we have on hand (Hartzell)
has an interference on the flange we built to MT's specs. Are you
planning on using an MT, Whirlwind, or Hartzell? There are subtle
differences. I hope the 6 bolt mock-up flange has been useful in the
meantime.
Ed
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|