---------------------------------------------------------- Glasair-List Digest Archive --- Total Messages Posted Sun 05/20/07: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:00 PM - Re: Re: Service Bulletin 160 (steve korney) ________________________________ Message 1 _____________________________________ Time: 05:00:10 PM PST US From: "steve korney" Subject: RE: Glasair-List: Re: Service Bulletin 160 You can put shim washers inside and between the axle and the two aluminum spacers and then the axle bolt and nut can be torqued to the proper spec without binding the bearings......(note) I had to put about a .040 shim in place...Now I tighten up the axle nut and the wheel bearings have the right pre-load and the nut has the proper torque... Best... Steve ----Original Message Follows---- From: Craymondw@aol.com Subject: Glasair-List: Re: Service Bulletin 160 Replacing the AN364-428A nose wheel fork axle nut with a A365-428A doesn't give enough bolt threads and a longer bolt may be required. Note: When over torque, the wheel bearings start to bind up. ************************************** See what's free at http://www.aol.com. _________________________________________________________________ More photos, more messages, more storageget 2GB with Windows Live Hotmail. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message glasair-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Glasair-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/glasair-list Browse Digests http://www.matronics.com/digest/glasair-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.