---------------------------------------------------------- Glasair-List Digest Archive --- Total Messages Posted Thu 11/22/07: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 12:13 AM - What Are You Thankful For...? (Matt Dralle) 1. 08:03 AM - Re: Extention for fuel selector valve (Craymondw@aol.com) 2. 10:26 AM - Re: Re: Extention for fuel selector valve (John Grosse) 3. 11:01 AM - Re: Re: Extention for fuel selector valve (Bruce Gray) ________________________________ Message 0 _____________________________________ Time: 12:13:24 AM PST US From: Matt Dralle Subject: Glasair-List: What Are You Thankful For...? Dear Listers, Here in the United States, Thursday is our National day of Thanksgiving. Many of us will be traveling to be with our families and friends to share in generous feasts of plenty and giving thanks for many blessings that have been bestowed upon us. Many Listers have expressed over the last couple of weeks how thankful they are for the Email Lists and Forums here on the Matronics servers and for all of the assistance and comradery they have experienced being a part of the Lists. One of my favorite kind of comments is when write to me and says something like, "Its the first thing I do in the morning while I'm having my morning coffee!". That's a wonderful tribute to the purpose and function of these Lists. Its always great to hear I'm not the only one that jumps out of bed each morning to check my List email!! Won't you take a minute today and show your appreciation for these Lists and for their continued operation and upgrade? The List Contribution Site is: http://www.matronics.com/contribution Thank you in advance for your kind consideration, Matt Dralle Matronics Email List Administrator ________________________________ Message 1 _____________________________________ Time: 08:03:03 AM PST US From: Craymondw@aol.com Subject: Glasair-List: Re: Extention for fuel selector valve I got a quote for the four inch long by 1/4 shaft extension for the fuel selector valve from Glasair. They wanted $49.00. So I showed the shaft to a friend that operates a machine shop. He took a piece of raw stock, cut it to size, drilled and tapped one end then filed in the flat spot and drilled a 1/16 keeper hole in the other end. It took less than fifteen minutes to do and when he was through, he said it was so little and to forget it. I asked him what the cost would be if the part was mass produced, he replied; less than a buck. **************************************Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001) ________________________________ Message 2 _____________________________________ Time: 10:26:31 AM PST US From: John Grosse Subject: Re: Glasair-List: Re: Extention for fuel selector valve Anyone surprised? Craymondw@aol.com wrote: > I got a quote for the four inch long by 1/4 shaft extension for the > fuel selector valve from Glasair. They wanted $49.00. So I showed the > shaft to a friend that operates a machine shop. He took a piece of raw > stock, cut it to size, drilled and tapped one end then filed in the > flat spot and drilled a 1/16 keeper hole in the other end. It took > less than fifteen minutes to do and when he was through, he said it > was so little and to forget it. I asked him what the cost would be if > the part was mass produced, he replied; less than a buck. > > ________________________________ Message 3 _____________________________________ Time: 11:01:24 AM PST US From: "Bruce Gray" Subject: RE: Glasair-List: Re: Extention for fuel selector valve This being experimental aviation, you can fabricate any part you desire. However, most of us don't have access to a buddy with a machine shop. If you took that part to a commercial shop and said "make one", I'm sure your bill would be more than 49 dollars. Wait until you need something big, like a motor mount or a gear leg. Then you'll be glad Glasair Aviation is there and will pay whatever they charge. And in order to stay there they have to make a profit on what they sell. So, do I consider a $49 sell price on a part you say costs a couple of bucks to make - NO. Bruce www.Glasair.org -----Original Message----- From: owner-glasair-list-server@matronics.com [mailto:owner-glasair-list-server@matronics.com] On Behalf Of John Grosse Sent: Thursday, November 22, 2007 1:26 PM Subject: Re: Glasair-List: Re: Extention for fuel selector valve Anyone surprised? Craymondw@aol.com wrote: > I got a quote for the four inch long by 1/4 shaft extension for the > fuel selector valve from Glasair. They wanted $49.00. So I showed the > shaft to a friend that operates a machine shop. He took a piece of raw > stock, cut it to size, drilled and tapped one end then filed in the > flat spot and drilled a 1/16 keeper hole in the other end. It took > less than fifteen minutes to do and when he was through, he said it > was so little and to forget it. I asked him what the cost would be if > the part was mass produced, he replied; less than a buck. > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message glasair-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Glasair-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/glasair-list Browse Digests http://www.matronics.com/digest/glasair-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.