Today's Message Index:
----------------------
1. 08:55 AM - Re: Hatch Gas Springs (Craymondw@aol.com)
2. 09:34 AM - Re: Re: Hatch Gas Springs (steve korney)
3. 10:53 AM - Re: Re: Hatch Gas Springs (Bruce Gray)
4. 07:07 PM - Re: Re: Hatch Gas Springs (steve korney)
5. 09:18 PM - Re: Re: Hatch Gas Springs (Bruce Gray)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Hatch Gas Springs |
The supplier for hatch gas springs is a company named ORR & ORR INC. 3520
South Morgan Street . Chicago, Ill 60609-1524 tel: 773-254-0022. Their part
number is FAN119. When you order say it is for your boat.
When I installed my wear pad I used a strong expoxy glue and a heavy star
washer under the screw. I maintain 60 pounds of air pressure in my nose wheel
tire and have no shimmy problems. I have often wondered if the wear pad could
be made out of a bearing material or copper, soft aluminum etc.
I have found the best source for Glasair parts and problems are the people
at Phoenix Composites.
I regularly coat my hatch seals with talc powder and have had them on for
eleven years and they look as good as new. I have the old style that came with
the kit in 1990
**************Wondering what's for Dinner Tonight? Get new twists on family
favorites at AOL Food.
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Hatch Gas Springs |
What exactly does the gas spring fit....?
Best... Steve
From: Craymondw@aol.com
Subject: Glasair-List: Re: Hatch Gas Springs
The supplier for hatch gas springs is a company named ORR & ORR INC.
3520 South Morgan Street . Chicago, Ill 60609-1524 tel: 773-254-0022. Their
part
number is FAN119. When you order say it is for your boat.
When I installed my wear pad I used a strong expoxy glue and a heavy star
washer under the screw. I maintain 60 pounds of air pressure in my nose
wheel tire and have no shimmy problems. I have often wondered if the wear p
ad
could be made out of a bearing material or copper, soft aluminum etc.
I have found the best source for Glasair parts and problems are the
people at Phoenix Composites.
I regularly coat my hatch seals with talc powder and have had them on
for eleven years and they look as good as new. I have the old style that
came with the kit in 1990
Wondering what's for Dinner Tonight? Get new twists on family favorites at
AOL Food.
_________________________________________________________________
Stay in touch when you're away with Windows Live Messenger.
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refr
esh_messenger_052008
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Hatch Gas Springs |
The gull wing door.
Bruce
<http://www.glasair.org/> www.Glasair.org
-----Original Message-----
From: owner-glasair-list-server@matronics.com
[mailto:owner-glasair-list-server@matronics.com] On Behalf Of steve
korney
Sent: Friday, May 02, 2008 12:32 PM
Subject: RE: Glasair-List: Re: Hatch Gas Springs
What exactly does the gas spring fit....?
Best... Steve
_____
From: Craymondw@aol.com
Subject: Glasair-List: Re: Hatch Gas Springs
The supplier for hatch gas springs is a company named ORR & ORR INC.
3520
South Morgan Street . Chicago, Ill 60609-1524 tel: 773-254-0022. Their
part
number is FAN119. When you order say it is for your boat.
When I installed my wear pad I used a strong expoxy glue and a heavy
star
washer under the screw. I maintain 60 pounds of air pressure in my nose
wheel tire and have no shimmy problems. I have often wondered if the
wear
pad could be made out of a bearing material or copper, soft aluminum
etc.
I have found the best source for Glasair parts and problems are the
people
at Phoenix Composites.
I regularly coat my hatch seals with talc powder and have had them on
for
eleven years and they look as good as new. I have the old style that
came
with the kit in 1990
_____
Wondering what's for Dinner Tonight? Get new twists on family favorites
at
AOL <http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001>
Food.
target="_blank">http://www.matronics.com/Navigator?Glasair-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
_____
Stay in touch when you're away with Windows Live Messenger. IM anytime
you're online.
<http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_R
efres
h_messenger_052008>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Hatch Gas Springs |
Bruce... What is the open and closed length of the gas spring....? And, doe
s it fit a Glasair 1 RG with gull wing doors....?
Best... Steve
From: Bruce@glasair.org
Subject: RE: Glasair-List: Re: Hatch Gas Springs
Message
The
gull wing door.
Bruce
www.Glasair.org
-----Original Message-----
From:
owner-glasair-list-server@matronics.com
[mailto:owner-glasair-list-server@matronics.com] On Behalf Of steve
korney
Sent: Friday, May 02, 2008 12:32 PM
glasair-list@matronics.com
Subject: RE: Glasair-List: Re: Hatch Gas
Springs
What exactly does the gas spring
fit....?
Best... Steve
From: Craymondw@aol.com
Subject:
Glasair-List: Re: Hatch Gas Springs
glasair-list@matronics.com
The supplier for hatch gas springs is a company named ORR & ORR
INC. 3520 South Morgan Street . Chicago, Ill 60609-1524 tel: 773-254-00
22.
Their part number is FAN119. When you order say it is for your boat.
When I installed my wear pad I used a strong expoxy glue and a heavy
star washer under the screw. I maintain 60 pounds of air pressure in my
nose wheel tire and have no shimmy problems. I have often wondered if t
he
wear pad could be made out of a bearing material or copper,
soft aluminum etc.
I have found the best source for Glasair parts and problems are
the people at Phoenix Composites.
I regularly coat my hatch seals with talc powder and have had them
on for eleven years and they look as good as new. I have the old style
that came with the kit in 1990
Wondering what's for Dinner Tonight? Get new twists on family favorites
at AOL
Food.
target="_blank">http://www.matronics.com/Navigator?Glasair-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
Stay in touch when you're away with Windows Live Messenger. IM anytime yo
u're online.
href="http://www.matronics.com/Navigator?Glasair-List">http://www.matroni
cs.com/Navigator?Glasair-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
_________________________________________________________________
Stay in touch when you're away with Windows Live Messenger.
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refr
esh_messenger_052008
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Hatch Gas Springs |
I have no idea. The gas springs were changed between the GI and GII.
Bruce
<http://www.glasair.org/> www.Glasair.org
-----Original Message-----
From: owner-glasair-list-server@matronics.com
[mailto:owner-glasair-list-server@matronics.com] On Behalf Of steve
korney
Sent: Friday, May 02, 2008 10:05 PM
Subject: RE: Glasair-List: Re: Hatch Gas Springs
Bruce... What is the open and closed length of the gas spring....? And,
does
it fit a Glasair 1 RG with gull wing doors....?
Best... Steve
_____
From: Bruce@glasair.org
Subject: RE: Glasair-List: Re: Hatch Gas Springs
The gull wing door.
Bruce
<http://www.glasair.org/> www.Glasair.org
-----Original Message-----
From: owner-glasair-list-server@matronics.com
[mailto:owner-glasair-list-server@matronics.com] On Behalf Of steve
korney
Sent: Friday, May 02, 2008 12:32 PM
Subject: RE: Glasair-List: Re: Hatch Gas Springs
What exactly does the gas spring fit....?
Best... Steve
_____
From: Craymondw@aol.com
Subject: Glasair-List: Re: Hatch Gas Springs
The supplier for hatch gas springs is a company named ORR & ORR INC.
3520
South Morgan Street . Chicago, Ill 60609-1524 tel: 773-254-0022. Their
part
number is FAN119. When you order say it is for your boat.
When I installed my wear pad I used a strong expoxy glue and a heavy
star
washer under the screw. I maintain 60 pounds of air pressure in my nose
wheel tire and have no shimmy problems. I have often wondered if the
wear
pad could be made out of a bearing material or copper, soft aluminum
etc.
I have found the best source for Glasair parts and problems are the
people
at Phoenix Composites.
I regularly coat my hatch seals with talc powder and have had them on
for
eleven years and they look as good as new. I have the old style that
came
with the kit in 1990
_____
Wondering what's for Dinner Tonight? Get new twists on family favorites
at
AOL <http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001>
Food.
target="_blank">http://www.matronics.com/Navigator?Glasair-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
_____
Stay in touch when you're away with Windows Live Messenger. IM anytime
you're online.
<http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_R
efres
h_messenger_052008>
href="http://www.matronics.com/Navigator?Glasair-List">http://www.matro
nics.
com/Navigator?Glasair-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
target="_blank">http://www.matronics.com/Navigator?Glasair-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
_____
Stay in touch when you're away with Windows Live Messenger. IM anytime
you're online.
<http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_R
efres
h_messenger_052008>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|