Glasair-List Digest Archive

Thu 06/12/08


Total Messages Posted: 4



Today's Message Index:
----------------------
 
     1. 10:03 AM - Radio hiss (Arnold Plowman)
     2. 10:09 AM - Re: Radio hiss (Robert Feldtman)
     3. 10:25 AM - Re: Radio hiss (steve korney)
     4. 06:32 PM - Re: Radio hiss (Craymondw@aol.com)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:03:07 AM PST US
    Subject: Radio hiss
    From: "Arnold Plowman" <AHPlowman@varicore.com>
    I have installed a pc in my Glasair that I run True Flight software on. I love the XM weather and the approach plates as well as moving map but on the higher com frequencies the pc screen output causes enough electrical noise to make the radios hiss. I does not seem to reduce the receiver range much but just causes the radio to break the squelch limit. (like pulling the test button) My radios both do the same and one is an SL-30 and the other a GX-60 by Apollo (UPS). Anybody got an idea how to fix this? I have tried grounding and shielding all the PC lines, etc to no avail. Best Regards, Arnold Plowman, VP Sales Varicore Technologies, Inc. 800-978-8007


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:09:41 AM PST US
    From: "Robert Feldtman" <bobf@feldtman.com>
    Subject: Re: Radio hiss
    try some ferrite beads on the PC leads/mouse etc bobf On 6/12/08, Arnold Plowman <AHPlowman@varicore.com> wrote: > > I have installed a pc in my Glasair that I run True Flight software on. > I love the XM weather and the approach plates as well as moving map but on > the higher com frequencies the pc screen output causes enough electrical > noise to make the radios hiss. I does not seem to reduce the receiver range > much but just causes the radio to break the squelch limit. (like pulling the > test button) My radios both do the same and one is an SL-30 and the other a > GX-60 by Apollo (UPS). > > Anybody got an idea how to fix this? I have tried grounding and shielding > all the PC lines, etc to no avail. > > Best Regards, > > Arnold Plowman, VP Sales > Varicore Technologies, Inc. > 800-978-8007 > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:25:36 AM PST US
    From: steve korney <s_korney@hotmail.com>
    Subject: Radio hiss
    Arnold The filtration on the SL-30 stinks... It does the same thing on my xm radio , alternator, and all the other electrial system... I never heard any of th e noise with my KX155 King radios... Best... Steve Subject: Glasair-List: Radio hiss From: AHPlowman@varicore.com Message I have installed a pc in my Glasair that I run True Flight software on. I love the XM weather and the approach plates as well as moving map but on the higher com frequencies the pc screen outpu t causes enough electrical noise to make the radios hiss. I does not seem to reduce the receiver range much but just causes the radio to break the squel ch limit. (like pulling the test button) My radios both do the same and one is an SL-30 and the other a GX-60 by Apollo (UPS). Anybody got an idea how to fix this? I have tried grounding and shielding all the PC lines, etc to no avail. Best Regards, Arnold Plowman, VP Sales Varicore Technologies, Inc. 800-978-8007 _________________________________________________________________ Enjoy 5 GB of free, password-protected online storage. http://www.windowslive.com/skydrive/overview.html?ocid=TXT_TAGLM_WL_Refre sh_skydrive_062008 R0lGODlhLQAtAID/AP////f39ywAAAAALQAtAEACcAxup8vtvxKQsFon6d02898pGkgiYoCm6sq2 7iqWcmzOsmeXeA7uPJd5CYdD2g9oPF58ygqz+XhCG9JpJGmlYrPXGlfr/Yo/VW45e7amp2tou/lW xo/zX513z+Vt+1n/tiX2pxP4NUhy2FM4xtjIUQAAOw=


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:32:49 PM PST US
    From: Craymondw@aol.com
    Subject: Re: Radio hiss
    I have a dedicated wire that runs from the master solenoid to a radio bus bar and my radios are very quiet. **************Vote for your city's best dining and nightlife. City's Best 2008. (http://citysbest.aol.com?ncid=aolacg00050000000102)




    Other Matronics Email List Services

  • Post A New Message
  •   glasair-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Glasair-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/glasair-list
  • Browse Glasair-List Digests
  •   http://www.matronics.com/digest/glasair-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --