Today's Message Index:
----------------------
 
     1. 05:34 AM - Re: Still no culprit in "The case of the missing fuel" (Doug Dodson)
 
 
 
Message 1
| 					INDEX |  Back to Main INDEX |  
| 					NEXT |  Skip to NEXT Message |  
| 	LIST |  Reply to LIST Regarding this Message |  
| 		SENDER |  Reply to SENDER Regarding this Message |  
  | 
      
      
| Subject:  | Still no culprit in "The case of the missing fuel" | 
      
      Its entirely possible the wing was not full.  If the baffle cutouts are
      too small, then fuel migrates slowly to the various bays.  Many owners
      of older Glasairs have this problem.  The instructions were changed to
      make the cutouts bigger along the way.  Also, I don't recall if you have
      any fuel in aft wing bays.  This could also make it difficult to know
      how much fuel is actually on board.
      
      You could put the plane on scales and see if it get lighter overnight.
      
      - Doug
      -----Original Message-----
      From: owner-glasair-list-server@matronics.com
      [mailto:owner-glasair-list-server@matronics.com] On Behalf Of
      MPPalmer@aol.com
      Sent: Saturday, July 12, 2008 10:49 PM
      Subject: Glasair-List: Still no culprit in "The case of the missing
      fuel"
      
      Basically, nothing found. 
      
      I pulled the inspection panels this evening and peered all around the
      inside of the inner and outer bays. (I felt like a cancer surgeon,
      trying to make sure he hadn't missed anything.) The closest evidence I
      could find to a leak was two spots near each other on the roof of the
      wing, adjacent to the main spar cap, that I call a "ring spot." You
      know, like you see in acoustic ceiling tile when there's a rain leak in
      a roof. But in my case, the stain is white, not blue. And there's no
      corresponding stain on the wing floor. 
      
      Hint: When inspecting the wing internals for fuel leaks, do NOT use a
      new fangled LED flashlight. Use a conventional bulb. The "white" in an
      LED flashlight is too blue. In addition to making the whole wing look
      like one big fuel leak, the blue light may actually hide a bona fide
      leak, as you may not be able see the blue dye in 100LL. I prefer to use
      a mini-Mag light with the old hi-intensity bulb. You can unscrew the
      lens cap to put the thing in "candle" mode and put it in the wing to
      flood the interior with broad spectrum light. (Don't forget to take the
      flashlight out when you're done! I left one in once. Fortunately, I
      caught it before buttoning up, but it had been a day later and the
      battery died. May be best to leave a long string on these things... ) 
      
      I also inspected the seat pan areas for leaks, with particular attention
      to the wing attach fitting bolts. No leaking evident. 
      
      I did not detect the smell of fuel anywhere while sniffing around the
      panels. This is getting stranger and stranger. 
      
      I checked the fuel level in the mains today again visually. It's gone
      down a bit more in one day, but nothing like the first time. On the
      assumption I may have made a bad assumption about the wing being full
      the first time, I will plan to top it off again on Monday and see what
      happens with the level after that. If it goes down, I must have a leak. 
      
      I left a sample cup of fuel out on the wing yesterday. It's one of those
      old style ones - 1 1/2" diameter, about 1 3/4" tall. To my amazement, a
      full sample cup was nearly empty in a little over 24 hours! 
      
      Still, that's not 4 gallons in 2 day and I suppose if AvGas were
      suddenly evaporating more than it used to, then all sorts of people
      would be falling out of the sky due to fuel exhaustion. 
      
      I don't know if this indicates a medical condition on my part, but I
      can't smell the fuel fumes more than 3 inches away from the sample cup.
      It doesn't seem as strong as it used to.  (I'm not a smoker, nor have I
      ever been.) 
      
      If the fuel level goes down after a second top off, then my leak must be
      in one of the middle bay. (Murphy's Law.) But before cutting into the
      wing, I'll plan to do what John did and buy/borrow a propane sniffer and
      confirm/find the leak that way before cutting. 
      
      My question to those who have had wing leaks... were you losing enough
      fuel to where it cut your endurance by an hour? 
      
      
      Mike Palmer <><
      
      
      **************
      Get the scoop on last night's hottest shows and the live music scene in
      your area - Check out TourTracker.com!
      (http://www.tourtracker.com?NCID=aolmus00050000000112) 
      
      
 
Other Matronics Email List Services
 
 
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
 
 
-- Please support this service by making your Contribution today! --
  
 |