Today's Message Index:
----------------------
1. 06:10 PM - Re: Glasair-List Digest: 1 Msgs - 10/22/14 (mppalmer@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Glasair-List Digest: 1 Msgs - 10/22/14 |
=0A Sounds like the correct procedure. But I am curious to
know what you think caused the delamination in the first pla
ce? =0A=0AAnd I presume it was an obvious bubble or blister?
Unless you're going around tapping skins with a quarter (pe
r Ted Setzer), I don't know how an owner would find a de
lamination.=0A=0AMike Palmer <><=0A=0A =0A=0A =0A=0A
---------------------- 1. 09:04 AM - Re:
Delaminating (Craymondw@aol.com) _______________________________
_ Message 1 _____________________________________Time: 09:04:21
AM PST USFrom: Craymondw@aol.comSubject: Glasair-List: Re: Delaminat
ingHey guys, I just spotted a 4 inch in diameter delaminatio
n on the aft belly section on my Glasair2S. I thought I
would crawl inside and drill down to the skin an injec
t resin and use a jack to press the delimination back up
against the foam core..any ideas. ===========
===========================
================== =0A =0A
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|