Today's Message Index:
----------------------
1. 03:06 PM - Feedback Request (Alternative Engines) Kitplanes Magazine (Cory Emberson)
2. 06:07 PM - Low impedance or dynamic Mic (AMERIPOND@cs.com)
3. 07:10 PM - Re: Low impedance or dynamic Mic (Charlie England)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Feedback Request (Alternative Engines) Kitplanes Magazine |
--> Homebuilt-List message posted by: Cory Emberson <bootless@earthlink.net>
Hello all,
I would like to hear from you if you're a builder who has successfully
installed and flown an alternative engine in your plane. I'm compiling a
builder's roundup for Kitplanes magazine, and am looking for an
installation that's flown for a minimum of 300 hours, and is currently
flying. Also, we will not address any rotary engines, since a separate
article will cover those engines.
For the builders that we profile, the magazine will also be able to pay
you $100 for the write-up. I'll be at Sun 'n Fun until late morning on
Friday (April 7), so if you fly in, I'd be happy to take the photos
there. If not, we would also need at least 2-3 good photos, including a
close-up of the engine and an overall shot of the aircraft. Additional
photos would be great, and all photos will be returned. If you have
digital photos, it is very important that they be high-resolution, at
least 300 dpi. I have a list of specific areas to address if you'd like
to participate, but we can handle that off-line. Please feel free to
contact me off-line at: bootless (at) earthlink (dot) net (my despammed
email address).
Thank you so much!
best,
Cory Emberson
Contributing Editor
Kitplanes Magazine
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Low impedance or dynamic Mic |
--> Homebuilt-List message posted by: AMERIPOND@cs.com
Hey Guys: I just purchased an Icom IC a200 for my Exp.Helo and the manual
says;: if one uses a dynamic mic, a preamp is required... the mics(headsets) I
see in AC spruce and larceny are dynamic ...do they have built in preamps or am
I barking up the wrong tree..and need to look further??? (.Microphone
challenged) ...Jim Lynch
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Low impedance or dynamic Mic |
--> Homebuilt-List message posted by: Charlie England <ceengland@bellsouth.net>
AMERIPOND@cs.com wrote:
>--> Homebuilt-List message posted by: AMERIPOND@cs.com
>
>Hey Guys: I just purchased an Icom IC a200 for my Exp.Helo and the manual
>says;: if one uses a dynamic mic, a preamp is required... the mics(headsets) I
>see in AC spruce and larceny are dynamic ...do they have built in preamps or am
>I barking up the wrong tree..and need to look further??? (.Microphone
>challenged) ...Jim Lynch
>
Don't know what you're looking at from Spruce, but just about all
aviation headsets these days use electret condenser mics.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|