----------------------------------------------------------
                           Homebuilt-List Digest Archive
                                      ---
                     Total Messages Posted Fri 04/14/06: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 01:11 PM - Re: Homebuilt-List Digest: 0 Msgs - 04/13/06  (AMERIPOND@cs.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 01:11:13 PM PST US
From: AMERIPOND@cs.com
Subject: Homebuilt-List: Re: Homebuilt-List Digest: 0 Msgs - 04/13/06

--> Homebuilt-List message posted by: AMERIPOND@cs.com

Hi All
Recently I purchased a David Clark headset H-10-76 on e-bay  for use on a new 
I-com a 200 and being a single plug helicopter type I also purchased a 
helicopter to standard adaptor. The mic is best I can determine, the M87/a1c and

according to the I-com manual it should be compatible but I can't get an audio

signal into a scanner that I have near by. I hooked up a SWR/watt meter and it

shows a signal when I  hit transmit and also on the I-comm unit it shows tx but

no responce in asking for radio checks or on the scanner...any thoughts???... 
thanx Jim