Today's Message Index:
----------------------
1. 06:34 AM - Re: Removing Label Machine Generated Labels from Instrument Panel (James, Clive R)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Removing Label Machine Generated Labels from Instrument |
Panel
You do need to have a substantial paint job when using it....
I use it for loads of stuff, always have a tin handy for degreasing but
as you say it does melt stuff...
Regards, Clive
________________________________
From: owner-jabiru-list-server@matronics.com on behalf of rayj
Sent: Thu 14/07/2011 03:29
Subject: Re: Jabiru-List: Removing Label Machine Generated Labels from
Instrument Panel
I'm assuming it is trichloroethane. I'm not surprised that it did the
job. What did it do to the finish on your panel?
Raymond Julian
Kettle River, MN
"And you know that I could have me a million more friends,
and all I'd have to lose is my point of view." - John Prine
On 07/13/2011 03:05 AM, James, Clive R wrote:
> Brake Cleaner?
>
> ________________________________
>
> From: owner-jabiru-list-server@matronics.com on behalf of Jim Crowder
> Sent: Tue 12/07/2011 23:07
> To: Jabiru List
> Subject: Jabiru-List: Removing Label Machine Generated Labels from
Instrument Panel
>
>
> I am redoing my instrument panel and need to remove the printed tape
labels generated by a label machine. I have tried WD40, alcohol,
lacquer thinner, and a heat gun set as hot as I have so far dared to
apply. None of this has worked so far. The labels have been in place
about five years and seem to defy non destructive removal. A fingernail
doesn't work either. Help needed--any suggestions?
>
> Jim Crowder
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|