Today's Message Index:
----------------------
1. 02:16 PM - FWF Selection for a Zenith 601 HD (Jeff Davidson)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | FWF Selection for a Zenith 601 HD |
--> JabiruEngine-List message posted by: Jeff Davidson <jeffrey.davidson@earthlink.net>
Finally I am at the stage in my project at which I'm forced to make a FWF forward
selection in order to proceed. With little FWF experience myself, but with
lots of experience available via my local EAA chapter, I'm looking for advice
on the suitability of the Jabiru 3300 with the Zenith FWF package for my project.
I'm building a CH 601 HD with a firewall built with the heavier XL parts.
These include the thicker "shelf", the formed gussets to replace the L's just
under the shelf, the additional U channel on the cabin side of the "shelf",
and the retention of the original design firewall stiffeners for the HD. I'm
pretty much decided on the Jabiru 3300 for smoothness, low noise level, a little
power reserve - I'll probably run it at 2750 (100 HP) most of the time, that
a pre-engineered FWF package is available, and the great testimonials I have
heard. Basically, I want the easiest to install, most reliable, engine I can
get. I'd appreciate any wisdom that I might learn from and/or any hints on
how to actually make the purchase. Experience installing the engine and with
the wooden Sensenich propeller would be appreciated. From what I have learned
on my own, there is about one choice and only one (expensive) price! Thank you
in advance.
Jeff Davidson
Herndon, Virginia
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|