Today's Message Index:
----------------------
1. 07:38 PM - Re: engine whine in 3300 engine (Jim@jabirupacific.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | engine whine in 3300 engine |
Hi Don
My engine will whine at about 1150 RPM, If it is the same whine as my engine
it is from the straight cut gears on the camshaft and distributor gears.
It's kind of the same whine you get from a cam gear drive set up in a small
block Chevy instead of a timing chain drive.
Jim McCormick
Jabiru Pacific LLC
255 W Fallbrook 202B
Fresno, CA 93711
Office 559-431-1701
Fax 559-233-3676
www.jabirupacific.com
-----Original Message-----
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com]On Behalf Of doncherie
Sent: Monday, June 12, 2006 10:39 PM
To: jabiruengine-list@matronics.com
Subject: JabiruEngine-List: engine whine in 3300 engine
I have recently experienced a "whine" in the engine from 1200 RPM and
below.
The whine disappears at exactly 1200 rpm and reappears once throttling
back to that rpm.
We have taken the alternator out of the housing and checked for wear
none visible.
Cowlings have been removed to check for vibration of the engine on the
cowls etc.Whine still persists!
Engine has been run without master switch on to check if electrical noise
exists.
The engine is 117 hrs old and has been regularly and meticulously
maintained.
Any suggestions?
Regards,
Don Boyd
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|