---------------------------------------------------------- JabiruEngine-List Digest Archive --- Total Messages Posted Fri 11/03/06: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:07 AM - Have You Tried The New Matronics List Forum? (Matt Dralle) 2. 03:40 PM - Jab Service Bulletin JSB 012-1 Fly wheel bolts (Chuck Deiterich) ________________________________ Message 1 _____________________________________ Time: 10:07:02 AM PST US From: Matt Dralle Subject: JabiruEngine-List: Have You Tried The New Matronics List Forum? --> JabiruEngine-List message posted by: Matt Dralle Hello Listers, One of the major new additions to the Matronics Email Lists this year was the addition of a new and full function Forum Web Site at: http://forums.matronics.com The best part of these new Forums is that they are tied directly to the Classic email distribution Lists! That also means that posts go in both directions. If you post a message on the Forum web site, it will be cross posted to the respective Email List. And, if you post a message to a particular Email List, it will be cross posted to the same respective forum on the Forum site! So, no matter what your content viewing pleasure is - either direct email distribution or web-based GUI interface, you can have it at the Matronics Email Lists! Won't you make a Contribution to support these Lists? It is your SOLE Contributions that make their continued operation and upgrade possible! The Contribution site is Fast, Easy, and Secure. Please surf over and make your Contribution today: http://www.matronics.com/contribution Thank you!! Matt Dralle Matronics Email List Administrator _- _- _- _- _- _- ________________________________ Message 2 _____________________________________ Time: 03:40:43 PM PST US From: "Chuck Deiterich" Subject: JabiruEngine-List: Jab Service Bulletin JSB 012-1 Fly wheel bolts --> JabiruEngine-List message posted by: "Chuck Deiterich" According to Jab Service Bulletin JSB 012-1, it appears that almost all of us will have to pull our alternators and check the fly wheel bolts after six months or 50 hours which means now for most of us. It also says that if they move at all, they must be removed cleaned and replaced with locktite 620 which is extremely strong. If used originally the 620 might keep them from turning even if the tension on the flywheel is not enough, you may never know. Pete, Andy, Jim what is your take on this bulletin? Here is the link. http://www.jabiru.net.au/Service%20Bulletins/Engine%20files/Jabiru%20Engine% 20Flywheel%20Attachment%20JSB012-1.pdf Chuck D. _- _- _- _- _- _-