Today's Message Index:
----------------------
1. 12:54 AM - Re: [jabiruengines] Info on signing up for Matronics (Gilles Thesee)
2. 02:30 AM - test (Jeff Small)
3. 03:20 AM - Re: Distributor cap screws loose..2200 (Andy Silvester)
4. 06:37 AM - Re: Re: Distributor cap screws loose..2200 (Lynn Matteson)
5. 11:58 AM - Re: EGT Probes on J3300 and SonexEGT Probes on J3300 and Sonex (Milburn Reed)
6. 12:19 PM - Re: Relocation from Yahoo (Fred Hulen)
7. 12:44 PM - Re: Re: Distributor cap screws loose..2200 (Lynn Matteson)
8. 12:51 PM - Re: Relocation from Yahoo (Andy Silvester)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: [jabiruengines] Info on signing up for Matronics |
-------- Message original --------
Sujet: Re: [jabiruengines] Info on signing up for Matronics
De: GTH <gilles.thesee@free.fr>
Rpondre : jabiruengines@yahoogroups.com
Pour: jabiruengines@yahoogroups.com, jabiruengine-list@matronics.com
Rfrences: <BAY120-W20DC5C485408F63648197DAE760@phx.gbl>
<025b01c76a9f$00ed8960$6501a8c0@fred3c53476y07>
<016e01c76ab9$9eb4ede0$6401a8c0@bigblack>
Rob Turk a crit :
> Sheez..... Just because of *THREE* spam e-mails just THIS YEAR everyone
> moves to Matronics?!? Are you all out of your mind or something?? .....
>
> Come on folkes, we're here to discuss the Jabiru engine, not those very few
> spam messages that happen to show up. People flying planes should act as
> childish as this.
>
>
Rob,
I've been on the two Jabiru engine lists from the very first day I
subscribed. No problem by me as to which provider or server we're on.
The Matronics suggestion is just a technical one.
There no need to be upset about which channel the messages are coming
through.
I'm cross-posting this, just to be sure...
Best regards,
Gilles
http://contrails.free.fr
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
test do not archive
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Distributor cap screws loose..2200 |
Lynn,
I recommend using a drop of semi-permanent thread-locker (blue / Loctite 243 or
similar) on the cap screw threads.
Andy
--------
www.suncoastjabiru.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=101839#101839
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Distributor cap screws loose..2200 |
Right on, Andy, that's what I plan to do...then I'll apply the Sentry
Seal as a "monitoring" device.
Lynn
Kitfox IV Speedster...Jabiru 2200
On Mar 20, 2007, at 6:20 AM, Andy Silvester wrote:
> <info@suncoastjabiru.com>
>
> Lynn,
>
> I recommend using a drop of semi-permanent thread-locker (blue /
> Loctite 243 or similar) on the cap screw threads.
>
> Andy
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: EGT Probes on J3300 and SonexEGT Probes on J3300 |
and Sonex
Jim:
Do you have the probes for the 2200?
Mil
3-20-07
Jim
My CH 701 build project is moving along well, now thinking about the
Jabiru 2200, and have some questions.
1. I want to purchase the complete FWF package with the 2200, prop,etc
etc. Total cost?
2. Will there be a delay after ordering?
3. If a delay, how long, and payment schedule required?
4. Usual shipping cost to this area ( Somerset is 50 miles east of
Sacramento)? I may pick it up.
Mil Reed
3-7-07
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Relocation from Yahoo |
Andy, Pete, Jim,
Thanks for taking the iniative to TRY to get the Yahoo Jabiru group here
where it belongs. I'm sure there will be turmoil for a while but with
you good dealers located here it will settle out before too long.
Fred Hulen
* I hope the guys moving over here will remember to use "Do not
archive"
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Distributor cap screws loose..2200 |
When I got to the right-hand side distributor, both cap screws were
sufficiently tight. However, I did see quite a bit of oil leakage
coming from the distributor shaft seal. I've ordered a couple of
shaft seals from Pete to take care of this problem. I also found a
rivet missing from the side of the Bing carb where the nameplate is
fastened on. (At 237 hours on this engine, that's not a bad report
card.)
At Pete's suggestion, I called Bing and they are sending me a new
rivet...free of charge (the man said he "thought he could afford it").
Not earth-shattering news folks, but every little bit helps the
"ratings". : )
Lynn
On Mar 20, 2007, at 6:20 AM, Andy Silvester wrote:
> <info@suncoastjabiru.com>
>
> Lynn,
>
> I recommend using a drop of semi-permanent thread-locker (blue /
> Loctite 243 or similar) on the cap screw threads.
>
> Andy
>
> --------
> www.suncoastjabiru.com
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=101839#101839
>
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Relocation from Yahoo |
Thanks, Lynn.
I try to get on the list every day and will do my best to respond where I think
it will be of help.
Cheers, Andy
--------
www.suncoastjabiru.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=101940#101940
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|