Today's Message Index:
----------------------
1. 03:47 PM - Re: compression values (R.C.Harrison)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | compression values |
Hi! Martin
25% down on the leak down test is maximum permissible on any cylinder..
Otherwise IMHO the Compression test is barely worth the bother.
Regards
Bob H
Robt.C.Harrison
-----Original Message-----
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of
avidflyer01
Sent: 08 June 2007 23:28
Subject: JabiruEngine-List: compression values
<vegayacht@club.fr>
hi folks,
I would like to find out what are typical compression values on a
recent 2200; could those who measured their compressions give me their
results, together with approx engine hours and age?
as I have a problem with a leaky valve in one cylinder I carried out
some serious tests on my engine and found that on the three "good"
cylinders I have only 122psi (8.6 bar). I've heard about one engine
that at 300hrs had as much as 160psi (11.2bar), yet I also heard that
my 122psi is a reasonable compression.
My compressions were taken with a warm engine, one sparkplug per
cylinder removed, throttle fully open, good battery. Engine has 100
hrs, 2 years old (hyd lifters).
I also did a leak down test: pressure drop on good cylinders were 9%,
11% and 14%; it was 35% on the bad one.
thanksfor your help
Martin
Avid Flyer / Jab powered
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=117380#117380
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|