----------------------------------------------------------
                           JabiruEngine-List Digest Archive
                                      ---
                     Total Messages Posted Tue 09/25/07: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:40 AM - Re: Propeller bolts  (Jabiru USA)
     2. 07:39 AM - Re: Propeller bolts  (Noel Loveys)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:40:57 AM PST US
From: "Jabiru USA" <info@usjabiru.com>
Subject: RE: JabiruEngine-List: Propeller bolts


Hi Chuck,

Just drill the prop bushings and crush plate.  We do it all the time to fit
Sensenich props with 3/8 holes to the Jabiru hub system.

Pete

-----Original Message-----
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of Chuck
Deiterich
Sent: Monday, September 24, 2007 10:59 PM
Subject: JabiruEngine-List: Propeller bolts



My propeller bolts are AN4's (1/4x28).  To change to AN5's (5/16x24), can I
just simply drill the holes in the bushings, crush plate and prop to 5/16?
Of course the prop holes for the bushings' OD won't change.

Thanks,
Chuck D.
N701TX


________________________________  Message 2  _____________________________________


Time: 07:39:11 AM PST US
From: "Noel Loveys" <noelloveys@yahoo.ca>
Subject: RE: JabiruEngine-List: Propeller bolts


Before drilling any holes in the prop check with the manufacturer of the
prop.  Why the change??

Noel

> -----Original Message-----
> From: owner-jabiruengine-list-server@matronics.com 
> [mailto:owner-jabiruengine-list-server@matronics.com] On 
> Behalf Of Chuck Deiterich
> Sent: Tuesday, September 25, 2007 1:29 AM
> To: jabiruengine-list@matronics.com
> Subject: JabiruEngine-List: Propeller bolts
> 
> 
> <cffd@pgrb.com>
> 
> 
> My propeller bolts are AN4's (1/4x28).  To change to AN5's 
> (5/16x24), can I
> just simply drill the holes in the bushings, crush plate and 
> prop to 5/16?
> Of course the prop holes for the bushings' OD won't change.
> 
> Thanks,
> Chuck D.
> N701TX
> 
> 
> 
> 
> 
> 


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               jabiruengine-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/JabiruEngine-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/jabiruengine-list
Browse Digests                   http://www.matronics.com/digest/jabiruengine-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.