Today's Message Index:
----------------------
1. 07:04 AM - EGT Probes (Chuck Deiterich)
2. 07:44 AM - Re: EGT Probes (Andy Silvester)
3. 12:12 PM - Re: EGT Probes (Lynn Matteson)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I am going to add EGT's to my 2200 (SN 988).
I can get probes that are either 1/2 inch long or 1 inch long.
Any comments on which length should I get?
Chuck D.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Chuck,
Get the 1" ones; they'll span the inside diameter of the exhaust pipes
nicely.
Andy Silvester
Suncoast Sportplanes, Inc
813 377 2716
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of Chuck
Deiterich
Sent: 09 February 2008 12:59
Subject: JabiruEngine-List: EGT Probes
I am going to add EGT's to my 2200 (SN 988).
I can get probes that are either 1/2 inch long or 1 inch long.
Any comments on which length should I get?
Chuck D.
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Andy-
Wouldn't you want the tip of the probe to be in the center of the
pipe? It's been my experience (a few years spent installing
thermocouples in test cars for Chrysler Corp) that it's where the two
dissimilar wires come together...usually at the tip of the
thermocouple...that the reading is made. I'll certainly defer to your
knowledge of the thermocouples in question....I know nothing about
those particular ones.
Lynn Matteson
Grass Lake, Michigan
Kitfox IV Speedster w/Jabiru 2200
flying w/470+ hrs
On Feb 9, 2008, at 10:39 AM, Andy Silvester wrote:
> Chuck,
>
>
> Get the 1 ones; theyll span the inside diameter of the exhaust
> pipes nicely.
>
>
> Andy Silvester
>
> Suncoast Sportplanes, Inc
>
> 813 377 2716
>
>
> From: owner-jabiruengine-list-server@matronics.com [mailto:owner-
> jabiruengine-list-server@matronics.com] On Behalf Of Chuck Deiterich
> Sent: 09 February 2008 12:59
> To: Jab-list
> Subject: JabiruEngine-List: EGT Probes
>
>
> I am going to add EGT's to my 2200 (SN 988).
> I can get probes that are either 1/2 inch long or 1 inch long.
> Any comments on which length should I get?
>
> Chuck D.
>
> forums.matronics.com_-
> ============================================================ _-
> contribution_-
> ===========================================================
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|