---------------------------------------------------------- JabiruEngine-List Digest Archive --- Total Messages Posted Sat 02/09/08: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:04 AM - EGT Probes (Chuck Deiterich) 2. 07:44 AM - Re: EGT Probes (Andy Silvester) 3. 12:12 PM - Re: EGT Probes (Lynn Matteson) ________________________________ Message 1 _____________________________________ Time: 07:04:36 AM PST US From: "Chuck Deiterich" Subject: JabiruEngine-List: EGT Probes I am going to add EGT's to my 2200 (SN 988). I can get probes that are either 1/2 inch long or 1 inch long. Any comments on which length should I get? Chuck D. ________________________________ Message 2 _____________________________________ Time: 07:44:52 AM PST US From: "Andy Silvester" Subject: RE: JabiruEngine-List: EGT Probes Chuck, Get the 1" ones; they'll span the inside diameter of the exhaust pipes nicely. Andy Silvester Suncoast Sportplanes, Inc 813 377 2716 From: owner-jabiruengine-list-server@matronics.com [mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of Chuck Deiterich Sent: 09 February 2008 12:59 Subject: JabiruEngine-List: EGT Probes I am going to add EGT's to my 2200 (SN 988). I can get probes that are either 1/2 inch long or 1 inch long. Any comments on which length should I get? Chuck D. ________________________________ Message 3 _____________________________________ Time: 12:12:22 PM PST US From: Lynn Matteson Subject: Re: JabiruEngine-List: EGT Probes Andy- Wouldn't you want the tip of the probe to be in the center of the pipe? It's been my experience (a few years spent installing thermocouples in test cars for Chrysler Corp) that it's where the two dissimilar wires come together...usually at the tip of the thermocouple...that the reading is made. I'll certainly defer to your knowledge of the thermocouples in question....I know nothing about those particular ones. Lynn Matteson Grass Lake, Michigan Kitfox IV Speedster w/Jabiru 2200 flying w/470+ hrs On Feb 9, 2008, at 10:39 AM, Andy Silvester wrote: > Chuck, > > > Get the 1 ones; theyll span the inside diameter of the exhaust > pipes nicely. > > > Andy Silvester > > Suncoast Sportplanes, Inc > > 813 377 2716 > > > From: owner-jabiruengine-list-server@matronics.com [mailto:owner- > jabiruengine-list-server@matronics.com] On Behalf Of Chuck Deiterich > Sent: 09 February 2008 12:59 > To: Jab-list > Subject: JabiruEngine-List: EGT Probes > > > I am going to add EGT's to my 2200 (SN 988). > I can get probes that are either 1/2 inch long or 1 inch long. > Any comments on which length should I get? > > Chuck D. > > forums.matronics.com_- > ============================================================ _- > contribution_- > =========================================================== ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message jabiruengine-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/JabiruEngine-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/jabiruengine-list Browse Digests http://www.matronics.com/digest/jabiruengine-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.